The Extech EX470 True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 degrees Fahrenheit (-20 to 270 degrees Celsius) without contact. The built-in laser pointer centers the measuring area. Multimeter functions include AC and DC Voltage to 600 Volt, AC and DC current to 20 Amp, resistance to 40M, continuity and diode test. Also includes Type K thermometer for contact or air temperature measurements from -4 to 1832 degrees Fahrenheit (-20 to 750 degrees Celsius). Advanced functions include Capacitance, Frequency and Duty Cycle. The meter comes complete with test leads, Type K temperature probe, 9 Volt battery, protective holster, adjustable tilt stand and Velcro hanging strap.

Features:

True RMS DMM with 12 functions and 0.3% basic accuracy
AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
Input fuse protection and mis-connection warning
20A max Current
Type K temperature measurements
Data hold, Relative, Auto power off
Large-digit backlit LCD
Complete with CAT III test leads, tilt stand, protective holster, velcro hanging strap, Type K bead wire temp probe and 9V battery

Alte produse EXTECH

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH PQ3350-3 ANALIZOR PUTERE SI ARMONICI 3 FAZE

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

EXTECH 407750 SONOMETRU CU INTERFATA PC

• Meets ANSI & IEC 651 Type 2 standards
• Background noise absorber for machine noise measurements filters ambient noise
• 30 to 130dB measurement range with ±1.5dB accuracy
• Large display with backlighting and analog bargraph

EXTECH EX650 CLESTE CURENT 600A TRUE RMS AC CU DETECTOR FARA CONTACT

• True RMS for accurate AC measurements
• 1.18" (30mm) jaw size accomodates conductors up to 350MCM
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Built-in non-contact voltage detector (NCV) with LED indicator
• Built-in LED flashlight for working in dimly-lit areas

EXTECH EX503 MULTIMETRU INDISTRIAL ROBUS SOLID CU 10 FUNCTII

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH 380193 RLC-METRU PORTABIL COMPONENTE PASIVE

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

EXTECH DC400 CLESTE CURENTI MICI TIP BUCLA 400A DC

• High Accuracy and Resolution
• One touch "Auto Zero"
• Large 4000 count LCD display
• Easy to use, single function meter

EXTECH EA80 EASYVIEW™ TESTER CALITATE AER INTERIOR CU DATALOGGING

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free dual wavelength NDIR (non-dispersive infrared) CO2
• CO2 measurement range: 0 to 6,000ppm
• Temperature measurement range: -4 to 140°F (-20 to 60°C)
• Humidity measurement range: 10 to 95%RH

VIDEOSCOP INSPECTII VIDEO EXTECH BR100

• BR100: Video Borescope Inspection Camera
• 17mm camera diameter and 2.4" Color TFT LCD Monitor
• Mini water-proof (IP67) camera head for high resolution viewing
• Two bright LED lamps with dimmer to illuminate viewed object
• Glare-free close-up field of view
• Display detaches for easy storage

EXTECH DT500 TELEMETRU LASER DISTANTA 70M CU BLUETOOTH

• Integrated Bluetooth® connects with iOS devices to transmit readings for remote viewing
• Works with free Apple app to display large easy-to-read values up to 30ft (10m) away
• Measures up to 229ft (70m) with a target plate
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean Theorem
• Continuous measurement function with Min/Max distance tracking updates every 5 seconds