MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.

MEASURING FUNCTIONS

Photovoltaic installations:

Measurements on DC side of PV installation:

Voltage, current, power, energy;
Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
I - U curve of PV modules and strings;
Irradiance;
Module temperature.

Measurements on AC side of PV installation (power quality):

Voltage, current, frequency, power, PF, energy, harmonics;
Efficiency of PV module, inverter, PV system calculation.

Electrical installations:

Insulation resistance;
Continuity of PE conductors;
Line impedance;
Loop impedance (sub-functions with high current and without RCD tripping);
RCD testing (type AC, A and B);
Earth resistance;
AC current (load and leakage);
TRMS voltage, frequency, phase sequence;
Power, energy, harmonics.

OTHER FEATURES

Photovoltaic installations:

Calculation of STC values;
Efficiency calculations;
Graphical representation of module’s I - U curve;
2 voltage & 2 current channels for simultaneous AC & DC parameters measurements;
Optional PV Remote Unit for simultaneous measurements of solar irradiation and temperature of PV module.

Electrical installations:

Automated RCD testing procedure;
Support for B type RCD;
Earth resistance measurement;
Built-in fuse tables for automatic evaluation of the line / loop impedance results;
Online monitoring of all 3 voltages;
Scope function;
Loop impedance test without tripping the RCD;
1-phase power and energy measurements (including harmonics up to 11th).

SOFTWARE

PC SW EuroLink PRO is a strong creating tool of professional Visual Inspection Report and Testing Result Report.

TECHNICAL DATA

Dimensions (w x h x l): 230 x 103 x 115 mm.
Mass (without accessories): 1.3 kg.

Standard accessories

MI 3108 Standard set MI 3108 ST

Instrument MI 3108 EurotestPV
Soft carrying bag, 2 pcs
Schuko-plug test cable
Test lead, 3 x 1.5 m
Test probe, 4 pcs (red, green, blue, black)
Crocodile clip, 3 pcs (red, green, blue, black)
PV Safety Probe
PV MC3/4 male/female adapters
AC/DC current clamp
Pyranometer
Temperature probe
Power supply adapter + 6 NiMH batteries, type AA
USB and RS232 - PS/2 cable
PC SW EuroLink PRO
Set of carrying straps
Short instruction manual
Instruction manual and handbook on CD
Calibration certificate

MI 3108 Pro set MI 3108 PS

Instrument MI 3108 EurotestPV
EurotestPV Remote
Tip commander
Soft carrying bag, 2 pcs
Schuko-plug test cable
Test lead, 3 x 1.5 m
Test probe, 4 pcs (red, green, blue, black)
Crocodile clip, 3 pcs (red, green, blue, black)
PV Safety Probe
PV MC3/4 male/female adapters
AC/DC current clamp
Pyranometer
Temperature probe
Power supply adapter + 6 NiMH batteries, type AA
USB and RS232 - PS/2 cable
PC SW EuroLink PRO
Set of carrying straps
Short instruction manual
Instruction manual and handbook on CD
Calibration certificate
Set of carrying straps
Short instruction manual
Instruction manual and handbook on CD
Calibration certificate

More products METREL

METREL MI3108 EUROTEST PV PHOTOVOLTAIC ANALYZER AND ELECTRICAL INSTALLATION SAFETY TESTER FOR SOLAR SYSTEMS

• Measurements on DC side of PV installation:
• Voltage, current, power, energy;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
• I - U curve of PV modules and strings;
• Irradiance;
• Module temperature.
• Measurements on AC side of PV installation (power quality):
• Voltage, current, frequency, power, PF, energy, harmonics;
• Efficiency of PV module, inverter, PV system calculation.

METREL MI3121 INSOLATION RESISTANCE MEGOHMMETER 2500V AND CONTINUITY METREL MI 3121H SMARTEC 2.5KV

• Insulation resistance up to 100 GO with DC voltage up to 2.5 kV;
• PI, DAR calculation;
• Continuity of PE conductors with 200 mA test current and polarity change;
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
• TRMS voltage and frequency.

POWER CURRENT CLAMP METER METREL MD 9240

• DC and TRMS AC voltage up to 600 V
• TRMS AC current measurement up to 1000 A
• Resistance measurement
• Continuity test
• Frequency measurement
• Contact temperature measurement
• Power factor
• Power (W, VA, Var)

METREL MD9035 AUTOMOTIVE DIGITAL MULTIMETER MD-9035

• Both IP (inductive) & IG (contact) RPM;
• ms Fuel-injection on time;
• % Duty cycle;
• Dwell angle;
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 6uF..2mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Electric field detection;
• Temperature measurement(thermocouple type K included)

METREL MI3200 TERAOHM HIGH VOLTAGE INSULATION TESTER 10KV

• Insulation resistance up to 10 T?
• DC Test voltage 500 V - 10 kV in step of 25 V
• The short circuit current is 5 mA
• Auto-calibation of measuring system
• Operates from mains or rechargeable supply
• Automatic discharge of capacitive loads
• Digital and bar graph results with date and time
• User friendly PC software with RS232 or USB isolated communication port

METREL MI3109 EUROTEST PV LITE PHOTOVOLTAIC ANALYZER TESTER FOR SOLAR PANELS SYSTEMS

• Measurements on DC side of PV installation:
• Voltage, current, power, energy;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
• I - U curve of PV modules and strings;
• Irradiance;
• Module temperature.
• Measurements on AC side of PV installation:
• Voltage, current, power;
• Efficiency of PV module, inverter, PV system calculation.

GENERAL PURPOSE HANDHELD MULTIMETER METREL MD 9020

• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 400O..40MO Resistance measurement;
• 500nF..3mF Capacitance measurement;
• 50Hz..1MHz Frequency Measurement

METREL MI3100 ELECTRICAL INSTALATION TESTER EUROTEST EASI

• DC insulation resistance,
• PE conductor continuity test,
• Line and Loop resistances with Fuse characteristics inside the instrument,
• RCD test with Trip lock function,
• phase sequence in 3-phase systems,
• on-line voltage monitor.

VARIABLE TRANSFORMER SINGLE OR THREE PHASE PORTABLE OR DESKTOP METREL

• Single-phase Built-in Variable Auto-Transformers
• Three-phase Built-in Variable Auto-Transformers
• Motor driven Variable Transformers
• Desk top Variable Transformers

METREL MD9050 PORTABLE DIGITAL HIGH RESOLUTION MULTIMETER MD-9050

• High resolution and accuracy
• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 60nF..25mF Capacitance measurement;
• 600O..60MO Resistance measurement;
• Diode test;
• 5Hz..1MHz Frequency of digital signals measurement
• Temperature measurement(thermocouple type K included)