Privacy policies

GDPR data Terms of use Cookies policy Privacy policy Delivery and Payment How to order?
I agree with terms and conditions Continue
 
office@distek.ro  +40 760952425   Ask price (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Metrel MI3109 EUROTEST PV LITE Photovoltaic Analyzer Tester for Solar Panels Systems

Code: Metrel MI3109 MI-3109 EUROTEST-PV-LITE


 
Datasheet PDF, 0.53 Mb
   

Description

MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.

 

MEASURING FUNCTIONS

Photovoltaic installations:

Measurements on DC side of PV installation:

  • Voltage, current, power, energy;
  • Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
  • I - U curve of PV modules and strings;
  • Irradiance;
  • Module temperature.

Measurements on AC side of PV installation:

  • Voltage, current, power;
  • Efficiency of PV module, inverter, PV system calculation.

 

Electrical installations:

  • Insulation resistance;
  • Continuity of PE conductors.

 

OTHER FEATURES

Photovoltaic installations:

  • Autotest
  • Calculation to STC values;
  • Efficiency calculations;
  • Graphical representation of module’s I - U curve;
  • 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements;
  • Optional PV Remote Unit for simultaneous measurements of solar irradiation and temperature of PV module.

 

SOFTWARE

PC SW EuroLink PRO is a strong creating tool of professional Visual Inspection Report and Testing Result Report.

 

TECHNICAL DATA

Dimensions (w x h x l): 230 x 103 x 115 mm.
Mass (without accessories): 1.3 kg.

 

Standard accessories

MI 3109 Standard set MI 3109 ST

  • Instrument MI 3109 EurotestPV Lite
  • Soft carrying bag
  • Universal PV test lead, 3 x 1.5 m
  • PV Continuity test lead, 2 x 1,5 m
  • Test probe, 3 pcs (red, blue, green)
  • Crocodile clip, 3 pcs (red, blue, green)
  • PV MC3/4 male/female adapters
  • AC/DC current clamp
  • Power supply adapter + 6 NiMH batteries, type AA
  • USB and RS232 - PS/2 cable
  • PC SW EuroLink PRO
  • Carrying strap
  • Short instruction manual
  • Instruction manual and handbook on CD
  • Calibration certificate

 

 

MI 3109 Pro set MI 3109 PS

  • Instrument MI 3109 EurotestPV Lite
  • EurotestPV Remote
  • PV Safety Probe
  • Pyranometer
  • Temperature probe
  • Soft carrying bag, 2 pcs
  • Universal PV test lead, 3 x 1.5 m
  • PV Continuity test lead, 2 x 1,5 m
  • Test probe, 3 pcs (red, blue, green)
  • Crocodile clip, 3 pcs (red, blue, green)
  • PV MC3/4 male/female adapters
  • AC/DC current clamp
  • Power supply adapter + 6 NiMH batteries, type AA
  • USB and RS232 - PS/2 cable
  • PC SW EuroLink PRO
  • Carrying strap
  • Short instruction manual
  • Instruction manual and handbook on CD
  • Calibration certificate

 

 

More products METREL

METREL MI2150 INSTALLCHECK ELECTRICIANS INSTALLATION TESTER

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results

 
ELECTRICAL SAFETY EQUIPMENT DEMONSTRATION BOARD METREL MI 3300 PAT DEMO

• PAT Demoboard is intended for demonstration of electrical equipment safety management.
• Presentation of safety management of electrical equipment in seminars, courses.
• Presentation of typical safety problems on electrical equipment.
• Practical demonstration of measuring instruments (performing tests, making right connections, analysing measured results).
• Continuity of equipotential bonding
• Insulation resistance
• Leakage current
• Touch leakage current
• Polarity of cables
• Functional operation

 
METREL MI3310 SIGMAGT SAFETY ANALYZER FOR PORTABLE ELECTRICAL EQUIPMENT

• Earth bond / continuity resistance (200 mA)
• Insulation resistance
• Insulation resistance of isolated accessible conductive parts
• Substitute leakage current
• Substitute leakage current of isolated accessible conductive parts
• Differential leakage current
• Touch leakage current
• IEC cord polarity test

 
CURRENT CLAMPMETER WITH POWER MEASUREMENTS METREL MD 9235

• TRMS AC, DC voltage measurement;
• TRMS AC current measurement;
• Resistance measurement;
• Frequency measurement;
• Continuity test (acoustic signaling);
• Power parameters measurement.

 
METREL MI3250 PRECISION RESISTANCE MICROOHMMETER 10A

• Bidirectional resistance measurement from 0,1 µO up to 2000 O
• test current up to 10 A
• Highly efficient 10 A current source generates 10 A into 200 mO load for 15 min without overheating
• High overvoltage protection (CAT IV / 300 V)
• Custom limits can be set for PASS / FAIL evaluation of test result.
• 50 Hz / 60 Hz ripple detection and rejection.
• Instrument can be powered from mains or internal rechargeable battery.
• Up to 1000 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

 
PEN TYPE NON-CONTACT VOLTAGE DETECTOR METREL MD115

• 12 V … 1000 V AC measurement range
• Optical and vibrating indication
• CAT III / 1000 V overvoltage protection

 
METREL MD9015 ELECTRICIAN HANDHELD MULTIMETER MD-9015

• 1000V DC, 750V AC voltage measurement;
• 10A AC, DC current measurement;
• 250O..25MO Resistance measurement;
• 2500nF..25mF Capacitance measurement;
• 30Hz..200kHz Frequency Measurement
• Temperature measurement

 
METREL MI2088 EARTH INSULATION TESTER

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

 
METREL MI3304 BETAGT PLUS ELECTROSECURITY SAFETY ANALYZER FOR PORTABLE EQUIPMENTS CF. IEC EN VDE STANDARD

• Continuity tests (200 mA, 4 A, 10 A, 25 A).
• Insulation resistance.
• Substitute leakage current.
• Differential leakage current.
• Touch leakage current.
• IEC cord polarity test.
• Leakage and load TRMS current measurement with current clamp.

 
DEMONSTRATION BOARD FOR SHOWING ELECTRICAL SWITCHBOARD IN SINGLE AND THREE-PHASE SYSTEMS METREL MI 3099 DEMO

• Switchboard and on Circuit side
• supporting one and three phase system
• RCD can be simulated
• TN-C(S) or TT type of earthing system on electrical installation