Metrel MI3200 TERAOHM High Voltage Insulation Tester 10kV

• 1000V DC, 750V AC voltage measurement;
• 10A AC, DC current measurement;
• 250O..25MO Resistance measurement;
• 2500nF..25mF Capacitance measurement;
• 30Hz..200kHz Frequency Measurement
• Temperature measurement

 

• Switchboard and on Circuit side
• supporting one and three phase system
• RCD can be simulated
• TN-C(S) or TT type of earthing system on electrical installation

 

• High precision line impedance;
• High precision fault loop impedance;
• Contact voltage.
• Range widening: adapts the instruments to read from 0.1 m? up to 19.99 ?.
• Multi-system testing: works on both single phase and 3-phase systems (110 V to 440 V).

 

• easy to use LAN tester with wide variety of functions for fault finding
• troubleshooting on IT cabling connections
• TDR facility with adjustable NVP
• determination of distance to the fault
• cable length measurement
• pair determination in multi-pair cables
• crossed pairs,
• crosstalk,
• short-circuit,
• mismatched pairs,
• bad contacts,
• no shield etc..

 

• Complete representation of a real low voltage installation in industrial and residential areas
• sockets,
• electrical loads,
• lightning,
• earthing systems for TT, TN and IT types of installations.
• 65 different measurements according to IEC/EN61557 are supported.
• Fault situation simulation switches can generate 19 errors or combination of these
• Detailed instruction manual with profound explanation of all typical measurements.

 

• Measurement of step voltage and contact voltage.
• Measurement of earthing resistance with resolution of 1 m?.
• Measurement of specific earth resistance.
• High current of up to 50 A and effective suppression of noise
• Excellent immunity even against changing earth currents.
• Autonomous Step Voltage meter: no need for long voltage leads.
• Downloads test results directly to the PC with the help of the professional PC SW package HVLink

 

• IT System recognizing, Voltage Range and Voltage Balance;
• ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE;
• Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current;
• IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control;
• Alarm Trigger or Trip-Out Check and Adjust.

 

• 1000V AC, DC voltage measurement;
• 8A AC, DC current measurement;
• 600O..60MO Resistance measurement;
• 60nF..3mF Capacitance measurement;
• 5Hz..1MHz Frequency Measurement
• Temperature measurement(thermocouple type K included)

 

• Insulation resistance with DC voltage
• Continuity of PE conductors with 200 mA test current with polarity change
• Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping
• Line impedance
• Loop impedance
• Loop impedance with Trip Lock RCD function
• TRMS voltage and frequency
• Phase sequence
• RCD testing (general and selective, type AC, A and B)
• Earth resistance (3-wire method).

 

• Wiring check
• DC insulation resistance
• Continuity test
• Line and Loop resistance
• RCD test
• Phase sequence
• Pass/Fail visual and audio presentation of results