The digital multimeter MD 9016 is a perfect combination of size, Innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electrotechnical problems. Display with large easy-to-read figures and one-handed operation make MD 9016 an extremely easy-to-use. This compact instrument combines a high level of functionality and small size and portability.

TEST FUNCTIONS

AC, DC voltage measurement;
AC, DC current measurement;
Capacitance measurement;
Resistance measurement;
Diode test;
Frequency measurement;
Continuity test (acoustic signaling);
Electric field detection;
Temperature measurement.

TECHNICAL DATA

Dimensions (w x h x l): 80 x 50 x 161 mm

Mass (without accessories): 340 g

Standard accessories

MD 9016 Standard set

Multimeter MD 9016 with rubber holster
Test lead with probe, 2 pcs
Thermocouple probe, type K
1.5 V battery, type AAA, 2 pcs
Instruction manual
Warranty

More products METREL

METREL MI2142 ALPHA-PAT ELECTRICAL SAFETY ANALYZER CF. IEC EN VDE STANDARD

• Functional and visual inspection;
• Earth bond resistance;
• Insulation resistance;
• Substitute leakage current;
• Differential leakage current test;
• Touch leakage test;
• IEC cord polarity test;

ELECTRICAL SAFETY EQUIPMENT DEMONSTRATION BOARD METREL MI 3300 PAT DEMO

• PAT Demoboard is intended for demonstration of electrical equipment safety management.
• Presentation of safety management of electrical equipment in seminars, courses.
• Presentation of typical safety problems on electrical equipment.
• Practical demonstration of measuring instruments (performing tests, making right connections, analysing measured results).
• Continuity of equipotential bonding
• Insulation resistance
• Leakage current
• Touch leakage current
• Polarity of cables
• Functional operation

METREL MI2892 POWER MASTER CLASS A POWER QUALITY ANALYZER MI-2892

• Voltage: TRMS, peak, crest factor (4-channel)
• Current: TRMS, peak, crest factor (4-channel)
• Power (active, reactive, apparent)
• Power measurements fully compliant with IEEE 1459 (active, nonactive, fundamental, harmonic, load unbalance)
• Unbalance, flicker measurement
• Harmonic and interharmonic analysis up to 50th harmonics, THD measurement
• Energy (active, reactive, generated, consumed)
• Power quality analysis according to EN 50160 and IEC 61000-4-30 Class A

USUAL UNIVERSAL CURRENT CLAMP METER METREL MD 9225

• TRMS AC, DC voltage measurement;
• TRMS AC, DC current measurement;
• Capacitance measurement;
• Resistance measurement;
• Diode test;
• Frequency measurement;
• Continuity test (acoustic signaling);
• Temperature measurement.

METREL MI3122 SMARTEC Z RCD LOOP/ LINE IMPEDANCE SHORT-CIRCUIT CURRENT TESTER

• Loop impedance / prospective fault current
• Line impedance / prospective short-circuit current
• Built-in fuse characteristics for quick evaluation of measuring results
• RCD tests (trip out time, contact voltage, ramp test, Autotest)
• Testing on 1- and 3-phase systems
• Phase sequence test

METREL MI3123 SMARTEC EARTH RESISTANCE TESTER

• Supports all types of earthing resistance measurements:
• - Standard earthing resistance measurement with spikes
• - Selective earthing resistance test with one current clamp
• - Selective (contactless) earthing resistance with two current clamps
• - Specific earth resistance measurement
• Leakage current tests with current clamps
• Load current tests with current clamps
• High accuracy, very high immunity against external noise
• Preprogrammed limits

METREL MI3121 INSULATING RESISTANCE MEGOHMMETER AND CONTINUITY

• Very large LCD display with bargraph and backlight
• High measuring range of up to 30 G? with test voltage from 50 V to 1000 V
• Fast and reliable continuity tests with automatic polarity reversal
• Voltage and frequency measurements
• Preprogrammed limits
• PASS/FAIL evaluation of result
• Bright GREEN/RED indicators provides visual evaluation of results
• Suited for testing on CAT IV installations

METREL MI2088 EARTH INSULATION TESTER

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

METREL MI2093 LINE TRACER FUSE FINDING INSTALLATION TESTER FOR UNDER-WALL CABLES

• Field proven instrument for under-wall low voltage installation tracing
• fuse finding
• short-circuit spot determination and metal installation tracing
• Can be used on energized or voltage-free systems.
• Tips and detailed descriptions of connection schemes for various combinations from everyday practice.

GENERAL PURPOSE HANDHELD MULTIMETER METREL MD 9020

• 1000V TRMS AC, DC voltage measurement;
• 10A TRMS AC, DC current measurement;
• 400O..40MO Resistance measurement;
• 500nF..3mF Capacitance measurement;
• 50Hz..1MHz Frequency Measurement