Rohde & Schwarz FSH3 Spectrum Analyzer 100 kHz to 3 GHz, 100 Hz RBW
Rohde & Schwarz FSH313 Spectrum Analyzer 100 kHz to 3 GHz, 1 kHz RBW, Internal Tracking Generator
Rohde & Schwarz FSH323 Spectrum Analyzer 100 kHz to 3 GHz, 100 Hz RBW, Internal Tracking Generator

FSH-B1 Distance to Fault Measurement For FSH313/323/626 and FSH3-TV only. Requires FSH-Z2 or FSH-Z3.
FSH-K1 Remote Control Software (RS-232)
FSH-K2 Vector Reflection/Transmission Measurements For FSH313/323/626, FSH3-TV only
FSH-K3 Receiver Mode
FSH-K4 3GPP FDD Code Domain Power BTS/Node B Measurement For FSH323 Only.
FSH-Z1 Average Power Sensor 10 MHz to 8 GHz, 200 pW to 200 mW
FSH-Z2 VSWR Bridge & Power Divider Includes open, short load calibration standards. For models with tracking generator only.
FSH-Z3 VSWR bridge with DC bias and bypass switch 10 MHz to 6 GHz, 50 Ohms, includes open, short, load for calibration. For FSH626 only.
FSH-Z14 Directional Power Sensor 25 MHz to 1 GHz, 30 mW to 120 (300) W
FSH-Z44 Directional Power Sensor 200 MHz to 4 GHz, 30 mW to 120 (300) W
FSH-Z18 Average Power Sensor 10 MHz to 18 GHz, 200 pW to 200 mW
FSH-Z20 Cable for option FSH-B1 1 m, male/female Type-N.
FSH-Z21 12VDC Car Adapter
FSH-Z22 Serial to Parallel Interface Converter Interface converter for Deskjet, Laserjet, Epson FX, Postscript printers.
FSH-Z25 Soft Carrying Bag
FSH-Z26 Hard Carry Case
FSH-Z32 Spare Battery Pack
FSH-Z33 Spare AC Adapter
HZ-15 Probe set for E and H nearfield emissions
HZ-16 Preamplifier 3 GHz, 20 dB, for HZ-15

Alte produse Rohde & Schwarz

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

ANALIZOR DE RETEA VECTORIAL 300 KHZ..4/ 8/ 14/ 20 GHZ ROHDE & SCHWARZ ZVB

• 300 kHz to 4 GHz/ 8 GHz or
• 10 MHz to 14 GHz/ 20 GHz
• Instruments with two or four test ports - for multiport and balanced measurements

GENERATOR SEMNAL VECTORIAL 100 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMJ100A

• 100 kHz to 3 GHz or 6 GHz Frequency range
• 200 MHz RF bandwidth IQ modulator
• - 133 dBc Very low SSB phase noise

GENERATOR SEMNAL RF 9 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMA100A

• 9 kHz to 3 GHz or 6 GHz Frequency range
• Frequency, level and LF sweeps
• Very low SSB phase noise of typ. -134 dBc
• Phase-continuous frequency setting

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ / 6 GHZ ROHDE & SCHWARZ FSC

• 9 kHz to 3 GHz or 6 GHz Frequency range
• 10 Hz to 3 MHz RBW
• High sensitivity

GENERATOR SEMNAL VECTORIAL 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

OSCILOSCOP DIGITAL 4 X 500 MHZ ROHDE & SCHWARZ RTM1054

• 500 MHz bandwidth
• 4 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ ROHDE & SCHWARZ FS315

• 9 kHz to 3 GHz Frequency range
• 200 Hz to 20 MHz RBW
• 1 Hz Frequency counter resolution
• +33 dBm Maximum input level
• Tracking generator for scalar transmission and reflection measurements

POWERMETRU RF ROHDE & SCHWARZ NRP2

• Power measurements with a base unit or with cost-efficient USB power sensors alone
• Average, peak and peak-to-average power measurements from DC to 67 GHz
• Accurate measurements for GSM/EDGE, 3G, WLAN, WiMAX™, LTE and beyond
• Solutions for radar and EMC applications
• Ultra-fast statistical analysis

OSCILOSCOP DIGITAL 4 X 1 GHZ ROHDE & SCHWARZ RTO1014

• 1 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel