Generator semnal Vectorial 100 kHz..2.2 GHz/ 3 GHz/ 4 GHz/ 6 GHz Rohde & Schwarz SMU200A

Cod: Rohde & Schwarz SMU200A


 

Brosura produs PDF, 2 Mb

Descriere

  • 100 kHz to 2.2 GHz, 3 GHz, 4 GHz or 6 GHz Frequency ranges for the first RF path
  • Optional second RF path up to 2.2 GHz or 3 GHz
  • Up to two complete baseband paths
  • 200 MHz RF I/Q modulator bandwidth
  • High output power up to +19 dBm (PEP), overrange + 26 dBm
  • 2 x 2 MIMO with realtime fading possible
  • Lossless combination of baseband signals in the digital domain (e.g. for testing multistandard base stations)
  • Very low SSB phase noise of typ. -135 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth), typ. -139 dBc with the enhanced phase noise performance option
  • Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
  • Excellent ACLR of typically +70 dB for 3GPP FDD
  • Very high level repeatability of 0.05 dB
  • High-stability reference oscillator as standard
  • Two instruments can be combined for 2 x 4 or 4 x 2 MIMO
  • Optional fading simulator with up to 40 fading paths
  • Support of EUTRA/LTE FDD and TDD signal generation
  • Support of WiMAX™ IEEE 802.16-2004/Corr1-2005, 802.16e-2005 and WiBro
  • Four code channels in realtime for 3GPP FDD, support of HSDPA and HSUPA
  • Mixed frames with GSM, EDGE and EGPRS2 slots in one frame (with same symbol rate per frame)
  • Baseband generator with universal coder for realtime signal generation
  • Arbitrary waveform generator with 16 Msamples, 64 Msamples or 128 Msamples
  • Arbitrary waveform generator supported by R&S®WinIQSIM2™ and R&S®WinIQSIM™ simulation software
  • Color display with 800 × 600 pixels (SVGA format)
  • Intuitive user interface with graphical display of signal flow (block diagram)
  • Graphical display of baseband signals through built-in transient recorder
  • Context-sensitive help system
  • Very short frequency and level setting times (<2 ms); only 450 µs in List mode
  • Electronic attenuator up to 6 GHz over the full level range
  • Flexible high speed measurements with RF List mode and multisegment waveforms
  • Minimum space required as two complete generators are accommodated in one instrument of only four height units
  • Optional digital I/Q input and output; support of R&S®EX-IQ-Box for flexible data formats and clock generation
  • Support of R&S®NRP power sensors
  • Remote control via LAN (Gigabit Ethernet, VXI11) and GPIB
  • Remote operation via Windows Remote Desktop or VNC
  • User-selectable trigger and marker signals
  • USB connectors for keyboard, mouse and memory stick
  • LXI class C compliance
 

Accesorii standard

 

 

Optiuni recomandate

  • SMU-B102    100 kHz to 2.2 GHz
  • SMU-B103    100 kHz to 3 GHz
  • SMU-B104    100 kHz to 4 GHz
  • SMU-B106    100 kHz to 6 GHz
 

Alte produse Rohde & Schwarz

R&S NRP2 POWER METER

• Optionally integrated 50 MHz/1 mW reference source
• Hardware interfaces for remote control and triggering
• Emulation of other legacy power meter
• User-programmable save/recall locations

 

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

 

R&S HAMEG HMC8015 POWER ANALYZER

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions

 

R&S HAMEG HMC8012 DIGITAL MULTIMETER

• Basic accuracy: 0.015 % (DC)
• 5¾-digit display (480 000 counts)
• Simultaneous display of three measurement functions, e.g. DC + AC + statistics
• Measurement rate: up to 200 values/s

 

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ ROHDE & SCHWARZ FS315

• 9 kHz to 3 GHz Frequency range
• 200 Hz to 20 MHz RBW
• 1 Hz Frequency counter resolution
• +33 dBm Maximum input level
• Tracking generator for scalar transmission and reflection measurements

 

POWERMETRU RF USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

 

ANALIZOR DE SPECTRU IN TIMP REAL 10 HZ..7/ 13.6/ 30/ 40 GHZ ROHDE & SCHWARZ FSVR

• 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz Frequency range
• 40 MHz real-time analysis bandwidth
• Spectrum with persistence function
• Spectrogram display
• Display of power versus time
• Triggering on frequency masks

 

ANALIZOR AUDIO ANALOG/DIGITAL 2/ 4/ 8 CANALE ROHDE & SCHWARZ UPP

• Suitable for all interfaces: analog, digital and combined
• Parallel measurements on up to eight channels
• Up to 80 kHz bandwidth and 200 kHz sampling rate
• User-programmable filters for analyzer and generator
• Compact instrument with integrated PC and low height

 

OSCILOSCOP DIGITAL 2 X 2 GHZ ROHDE & SCHWARZ RTO1022

• 2 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

 

GENERATOR DE MICROUNDE 100 KHZ..22 GHZ/ 43.5 GHZ ROHDE & SCHWARZ SMF100A

• 1 GHz to 22 GHz or 43.5 GHz Frequency ranges
• 100 kHz to 1 GHz Optional Frequency Extension
• +25 dBm Very high output power