FSH-B1 Distance to Fault Measurement For FSH313/323/626 and FSH3-TV only. Requires FSH-Z2 or FSH-Z3.
FSH-K1 Remote Control Software (RS-232)
FSH-K2 Vector Reflection/Transmission Measurements For FSH313/323/626, FSH3-TV only
FSH-K3 Receiver Mode
FSH-K4 3GPP FDD Code Domain Power BTS/Node B Measurement For FSH323 Only.
FSH-Z1 Average Power Sensor 10 MHz to 8 GHz, 200 pW to 200 mW
FSH-Z2 VSWR Bridge & Power Divider Includes open, short load calibration standards. For models with tracking generator only.
FSH-Z3 VSWR bridge with DC bias and bypass switch 10 MHz to 6 GHz, 50 Ohms, includes open, short, load for calibration. For FSH626 only.
FSH-Z14 Directional Power Sensor 25 MHz to 1 GHz, 30 mW to 120 (300) W
FSH-Z44 Directional Power Sensor 200 MHz to 4 GHz, 30 mW to 120 (300) W
FSH-Z18 Average Power Sensor 10 MHz to 18 GHz, 200 pW to 200 mW
FSH-Z20 Cable for option FSH-B1 1 m, male/female Type-N.
FSH-Z21 12VDC Car Adapter
FSH-Z22 Serial to Parallel Interface Converter Interface converter for Deskjet, Laserjet, Epson FX, Postscript printers.
FSH-Z25 Soft Carrying Bag
FSH-Z26 Hard Carry Case
FSH-Z32 Spare Battery Pack
FSH-Z33 Spare AC Adapter
HZ-15 Probe set for E and H nearfield emissions
HZ-16 Preamplifier 3 GHz, 20 dB, for HZ-15

Alte produse Rohde & Schwarz

R&S CMW270 WIRELESS CONNECTIVITY TESTER

• Dual tester concept with multiple-standard RF measurements for WLAN (802.11 a,b,g,n,p,ac) SISO/MIMO and Bluetooth®
• General-purpose ARB generator for WLAN, Bluetooth®, GNSS and various broadcast technologies
• Continuous frequency range up to 6 GHz

R&S ZNL VECTOR NETWORK ANALYZER

• Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
• Two-port vector network analyzer for bidirectional measurements
• Wide dynamic range of typ. 130 dB

GENERATOR SEMNAL VECTORIAL 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box

POWERMETRU RF USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

R&S HAMEG HMC8015 POWER ANALYZER

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions

OSCILOSCOP DIGITAL 2 X 500 MHZ ROHDE & SCHWARZ RTM1052

• 500 MHz bandwidth
• 2 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

GENERATOR SEMNAL VECTORIAL 100 KHZ..2.2 GHZ/ 3 GHZ/ 4 GHZ/ 6 GHZ ROHDE & SCHWARZ SMU200A

• 100 kHz to 2.2 GHz, 3 GHz, 4 GHz or 6 GHz Frequency ranges for the first RF path
• Optional second RF path up to 2.2 GHz or 3 GHz
• Up to two complete baseband paths
• 200 MHz RF I/Q modulator bandwidth
• High output power up to +19 dBm (PEP), overrange + 26 dBm
• 2 x 2 MIMO with realtime fading possible

POWERMETRU RF USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z21

• 10 MHz to 18 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

R&S HAMEG HMC8012 DIGITAL MULTIMETER

• Basic accuracy: 0.015 % (DC)
• 5�-digit display (480 000 counts)
• Simultaneous display of three measurement functions, e.g. DC + AC + statistics
• Measurement rate: up to 200 values/s