9 kHz to 8 GHz Frequency range
100 Hz to 3 MHz RBW
<-141dBm sensitivity, with preamp <-161 dBm
Low measurement uncertainty (< 1 dB)
TDMA power, channel power, field stringth, OBW, channel table
Easy to replace Li-Ion battery, up to 4.5 hr operation
Internal VSWR bridge (FSH424/828)
Two-port network analyzer (opt. FSH-K42)
20 MHz demodulation bandwidth for analyzing LTE signals
Directional power measurements up to 4 GHz under operating conditions
SD memory expansion slot to store measurements, results and installation settings
Larger 6.5" Color LCD display
USB and LAN interfaces
Rugged, splash-proof housing for rough work in the field

Optiuni recomandate

Rohde & Schwarz FSH808 Spectrum Analyzer 9 kHz to 8 GHz. With Preamplifier
Rohde & Schwarz FSH818 Spectrum Analyzer 9 kHz to 8 GHz. With Preamplifier, Tracking Generator
Rohde & Schwarz FSH828 Spectrum Analyzer 100 kHz to 8 GHz. With Preamplifier, Tracking Generator, Internal VSWR Bridge

FSH-K40 Enables full LAN/USB Remote Control

FSH-K41 Distance to Fault Measurements Only for models FSH424 and FSH828. FSH-Z320 or FSH-Z321 is also required.

FSH-K42 Vector Transmission/Reflection Measurements

Alte produse Rohde & Schwarz

ANALIZOR DE SPECTRU PORTABIL 100 KHZ..3 GHZ ROHDE & SCHWARZ FSH3

• 100 kHz to 3 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ / 6 GHZ ROHDE & SCHWARZ FSC

• 9 kHz to 3 GHz or 6 GHz Frequency range
• 10 Hz to 3 MHz RBW
• High sensitivity

ANALIZOR PORTABIL CABLU & ANTENA 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

OSCILOSCOP DIGITAL 2 X 1 GHZ ROHDE & SCHWARZ RTO1012

• 1 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

POWERMETRU RF USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

POWERMETRU RF ROHDE & SCHWARZ NRP2

• Power measurements with a base unit or with cost-efficient USB power sensors alone
• Average, peak and peak-to-average power measurements from DC to 67 GHz
• Accurate measurements for GSM/EDGE, 3G, WLAN, WiMAX™, LTE and beyond
• Solutions for radar and EMC applications
• Ultra-fast statistical analysis

OSCILOSCOP DIGITAL 4 X 1 GHZ ROHDE & SCHWARZ RTO1014

• 1 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

GENERATOR DE MICROUNDE 100 KHZ..22 GHZ/ 43.5 GHZ ROHDE & SCHWARZ SMF100A

• 1 GHz to 22 GHz or 43.5 GHz Frequency ranges
• 100 kHz to 1 GHz Optional Frequency Extension
• +25 dBm Very high output power

POWERMETRU RF USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z21

• 10 MHz to 18 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals