Brand: Hameg

Generator de functii 10 MHz Hameg HM8030-6

Cod: Hameg HM8030-6


 

Brosura produs PDF, 0.23 Mb

Descriere

  • Frequency Range 50mHz…10MHz
  • Output Voltage up to 10Vpp (into 50O) 
  • Waveforms: Sine Wave, Triangle, Square Wave, Pulse, DC 
  • Distortion Factor <0.5% up to 1MHz, Rise and Fall Time typ. 15ns 
  • Internal and external Sweep, FM (with HO801) 
  • Surge- and short-circuit-proof Output 
  • Mainframe HM8001-2 required for operation
 

Accesorii standard

  • Operator’s Manual
 

Optiuni recomandate

  • HZ20 Adapter, BNC to 4 mm banana
  • HZ22 Feed-Through Termination 50 O
  • HZ33 Test Cable 50 O (BNC-BNC) 0.5 m
  • HZ34 Test Cable 50 O (BNC-BNC) 1.0 m
 

Alte produse Hameg

GENERATOR DE FUNCTII ARBITRARE 12.5 MHZ HAMEG HM8150

• Frequency Range 10mHz…12.5MHz
• Output Voltage 10mVpp…10Vpp (into 50O)
• Waveforms: Sine Wave, Square Wave, Triangle, Pulse, Sawtooth, Arbitrary
• Arbitrary Waveform Generator 40MSa/s

 

OSCILOSCOP DIGITAL 4 X 150 MHZ HAMEG HMO1524

• 150 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

PUNTE RLC-METRU 25 KHZ HAMEG HM8018

• Measurement Functions: L, C, R, T, Q/D, |Z|
• Basic Accuracy 0.2%
• 5 Measurement Frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 25kHz
• Max. Resolution: 0.001O, 0.001pF, 0.01µH

 

MASURATOR NIVEL PUTERE 1MW..8KW HAMEG HM8115-2

• Wide Measurement Range 1mW…8kW
• Voltage Range 100mV…500V, Current Range 1mA…16A
• Frequency Range DC…1kHz
• Simultaneous Voltage, Current and Power Display
• Display of apparent, effective and reactive Power
• Power Factor Display

 

ANALIZOR DE SPECTRU 100 KHZ..1.6GHZ HAMEG HMS1000/ HMS1010

• Frequency Range 100kHz…1.6GHz
• Tracking Generator HMS1010 -20…0dBm
• Amplitude Measurement Range -114…+20dBm
• DANL -135dBm with Preamp. Option HO3011
• Sweep Time 20ms…1,000s
• Resolution Bandwidth 100Hz…1MHz in 1-3 Steps, 200kHz (-3dB); additional 200Hz, 9kHz, 120kHz, 1MHz (-6dB)

 

FRECVENTMETRU DIGITAL UNIVERSAL 3 GHZ HAMEG HM8123

• Measurement Range 0Hz-3GHz
• 2 Measurement Inputs DC-200MHz, 1 Measurement Input 100MHz-3GHz
• Input Impedance A/B: 1MO/50O (switchable), Sensitivity 25mVrms
• Input Impedance C: 50O, Sensitivity 30mVrms
• 400 MHz Time Base with 0.5ppm Stability
• 10-Digit Resolution at 10s Gate Time

 

SURSA TRIPLA DE FORME DE UNDA ARBITRARE HAMEG HM8143

• 2x 0…30V/0…2A 1x 5V/0…2A
• Display resolution 10mV/1mA
• Parallel (up to 6A) and Series (up to 65V) Operation
• Electronic load up to 60W per channel (max. 2A)
• Arbitrary waveform power supply (4096 points, 12 bit)

 

GENERATOR DE FUNCTII 10 MHZ HAMEG HM8030-6

• Frequency Range 50mHz…10MHz
• Output Voltage up to 10Vpp (into 50O)
• Waveforms: Sine Wave, Triangle, Square Wave, Pulse, DC

 

OSCILOSCOP DIGITAL 4 X 70 MHZ HAMEG HMO724

• 70 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

SURSA CUADRUPLA PROGRAMABILA DE PRECIZIE HAMEG HMP4040

• 4 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA