Punte RLC-metru 25 kHz Hameg HM8018

• Frequency Range 10µHz…25MHz
• Output Voltage 5mVpp…10Vpp (into 50O) DC Offset ±5mV…5V
• Arbitrary Waveform Generator: 250MSa/s, 14Bit, 256kPts
• Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms incl. Standard Curves (white Noise, Cardiac etc.)

 

• 4 x 0…32V/0…10A 384W max.
• 384W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.2mA

 

• Frequency Range 100kHz… 3GHz
• Tracking Generator -20…0dBm(HMS3010 model)
• Amplitude Measurement Range -114…+20dBm
• Resolution Bandwidth 100Hz…1MHz

 

• 2 x 0…20V/0.5A 1 x 5V/1A
• 3-Digit switchable Displays (Display Resolution 0.1V/1mA)
• Pushbutton for Activating/Deactivating all Outputs
• Adjustable Current Limiting and Electronic Fuse

 

• 200 MHz bandwidth
• 4 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 2 channels, 1 GSa/s on 4 channels

 

• 70 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

• Measurement Range 0Hz…1.6GHz
• 10MHz Time Base with 1ppm Stability (TCXO)
• Input A: Input Impedance 1MO, Sensitivity 20mVrms
• Input C: Input Impedance 50O, Sensitivity 30mVrms
• 8-Digit Resolution for 10s Measuring Time

 

• 100 MHz bandwidth
• 2 analog channels and MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels
• 2 GSa/s sample rate on 1 channel, 1 GSa/s on 2 channels

 

• 1 x 0…32V/0…10A 1 x 0…32V/0…5A 188W max.
• 188W Output Power realized by intelligent Power Management
• Low Residual Ripple: <150µVrms due to linear Post Regulators
• High Setting- and Read-Back Resolution of 1mV up to 0.1mA

 

• 6½-Digit Display (1,200,000 Counts)
• Resolution: 100 nV, 100 pA, 100 µO, 0.01 °C/F
• DC Basic Accuracy 0.003 %
• 2-Wire/4-Wire Measurements