HT824 multifunctional process calibrator has high accuracy, high stability, can be widely used in site calibration of industry instruments and equipment in laboratory. Powerful functions, it can simulate to output voltage in millivolt and volt, current in milliampere, and many types of electric signals needed by the measurement and control during industry control process. It can also test or simulate kinds of TC and RTD signals.

Features:

HT824 multifunctional process calibrator has high accuracy, high stability, can be widely used in site calibration of industry instruments and equipment in laboratory. Powerful functions, it can simulate to output voltage in millivolt and volt, current in milliampere, and many types of electric signals needed by the measurement and control during industry control process. It can also test or simulate kinds of TC and RTD signals.
5 1/2 digit input/output display.
Manual/auto cold junction compensation and setting.
The temperature value can be directly measured/output.
Auto power off when the voltage of battery is low.
Apply advanced built-in battery management system. 7.4V/7800mAh lithium battery, which can easily last for over 8 hours during site measurement work.
Auto triangular wave/step wave signal output.
It can store 8 sets of measurement and output data, and recall it to display. All the setting value and the function in the last operation can be saved automatically after power-off.
The screen shows the connection diagram of probes and plugs to avoid wrong operation. It has backlight.
The output has manual/auto step and slope output function. It can arbitrarily set the value of 0%, 25%, 100% in the range of signal output to test the response speed of transmitter.
Application field: measurement and calibration of instruments, maintenance and overhaul of temperature instruments, automatically maintenance and overhaul, project construction debugging, detection and diagnosis of control system signal source, configuration of site instrument repairmen room, matching of the thermal engineering laboratory in electric power industry.

Alte produse HANTEK

HANTEK DSO5000BM OSCILOSCOP DIGITAL CU MEMORIE EXTINSA

• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard

HANTEK LA5034 ANALIZO LOGIC

• Continuously variable pre/post trigger position,Advanced Multi-Level Triggering
• +6V to -6V Adjustable Logic Threshold
• CAN, I2C, SPI and RS232 Interpreters
• Built-in 250MHz Frequency Counter

HANTEK DSO8000E OSCILOSCOP PORTABIL SCOPMETRU CU MULTIMETRU SI GENERATOR

• High bandwidth 70MHz-200MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth.
• 25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer
• 6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function.
• FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application.

HANTEK DSO3064 KIT VII KIT DIAGNOZA AUTO OSCILOSCOP USB

• First Diagnosis(Cranking Exhaust Diagnosis)
• Ignition Action(Current/Voltage)
• The Sensor(Air Flow Meter,Camshaft,Crankshaftˇ)
• Bus Diagnosis(CAN Bus Data View)
• Performer(Petrol/Diesel)

HANTEK HT3000PE SURSE DE LABORATOR

• Green/Amber LCD back-light selectable.
• Auto interchangeable of regulated voltage and current.
• Multi-turn variable device to provide high precision voltage setting.
• Step-by-step current limit setting.

HANTEK USBXI-1070 SISTEM ACHIZITII DE DATE LXI, USB, LAN, WIFI, RGB

• Simultaneous synchronization between modules.
• High-speed USB 2.0, Hot-swappable and auto-detectable characteristic minimizes startup time/effort
• Win XP/ Win 7 Microsoft? Windows? operating system, touch screen, easy to second development.
• Easy to set up local/wide area network by WIFI/Lan.

HANTEK IDSO OSCILOSCOP USB

• Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• FFT spectrum analyzer
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.

HANTEK HT3000PA SURSA VARIABILA TENSIUNE CURENT

• Overload protection circuit
• Low ripple voltage:<1mVp-p
• Output polarity:positive or negative
• Rugged reinfirced metal frame construction

HANTEK 1008A OSCILOSCOP USB 8 CANALE APLICATII AUTO

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
• Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.

HANTEK 6000BD OSCILOSCOAPE PE USB

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.