Hantek 1008A Osciloscop USB 8 canale aplicatii auto

Cod: Hantek 1008A


 

Brosura produs PDF, 2.47 Mb

Descriere

Hantek1008A

Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.

 

Features:

 

Highly efficient and cost-effective; 8 channels oscilloscope for vehicle testing; 2.4MSa/s real time sampling rate, 12bit vertical resolution; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.

 

1) Oscilloscope

  • 8 channels oscilloscope, 2.4MSa/s real time sampling rate
  • 12 bits vertical resolution, spectrum analysis function

 

3) Programmable Generator2

  • 8 channels programmable generator
  • Can analog signals of crankshaft, camshaft etc.

 

3) Others

  • USB 2.0 interface plug and play, and no need extra power supply;
  • More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
  • Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.
 

Alte produse HANTEK

HANTEK DDS3X25 GENERATOR DE FUNCTII SMENALE PE USB

• 200 MSa/s of sample rate, 12 bits of vertical resolution.
• 25Mz Arbitrary waveform output (sine wave up to 75 Mz).
• One computer can be linked with several DDS-3X25 to expand multi-channels.
• 50 MHz frequency counter.
• 12bits pattern generator.

 

HANTEK DDS3005 GENERATOR DE FUNCTII SEMNALE PE USB

• 14bits D/A resolution.
• USB2.0 interface, no external power source required, easy to use.
• Automatic calibration.
• One computer can connect many DDS, extend channel easily.

 

HANTEK IDSO OSCILOSCOP USB

• Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• FFT spectrum analyzer
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.

 

HANTEK HSA2016 ANALIZOR DE SPECTRU PORTABIL 1.6GHZ

• Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
• 5.6 inch highlight color display, 640*480 resolution, waveform display clearly.

 

HANTEK DSO3000(A) SERIES (1GSA/S) OSCILOSCOP USB

• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.

 

HANTEK DSO4004B OSCILOSCOAPE DIGITALE DE BANC

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
• Support a variety of SCPI remote control command
• Support optional RS232 port, LAN port. (Optional)

 

HANTEK 1008C OSCILOSCOP AUTO

• Ignition: primary and secondary
• Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
• Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
• Performer: Petrol/Diesel
• Starter and charging circuits

 

HANTEK 6000BD OSCILOSCOAPE PE USB

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.

 

HANTEK 1008A OSCILOSCOP USB 8 CANALE APLICATII AUTO

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
• Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.

 

HANTEK 6074BE OSCILOSCOP USB 4-CANALE

• The waveform data could be output to EXCEL,BMP,JPG.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• Provide secondary development library DLL; Provide LabviewVBVCQT developing examples.