DCP42 is a 160W Switching Power Supply. Single Output Continuous Switching Power Supply with USB offers high efficiency electrical power conversion for greater energy conservation and lighter weight. Complete with power cord, software, and USB cable. Software includes DC ramp and waveform generator.

Features:

Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
At maximum current (10A), voltage is limited to 16V
At maximum voltage (42V), current is limited to 3.8A
Dual action rotary encoder control with push knob for fine and coarse tuning
Remote control for Programming, Output Voltage/Current, and ON/OFF using supplied software, driver, and USB
Three on-board user-defined Voltage/Current presets
Store 20 presets with up to 999 cycles each on a PC via USB and supplied Software
Software also includes DC Ramp and Waveform Generator
Complete with power cord, software, and USB cable

More products EXTECH

EXTECH EX430 11 FUNCTION TRUE RMS PROFESSIONAL MULTIMETER

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 20A max Current

EXTECH MO50 MOISTURE METER

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

EXTECH EX570 12 FUNCTION TRUE RMS INDUSTRIAL MULTIMETER WITH IR THERMOMETER

• Built-in Non-contact InfraRed Thermometer with laser pointer
• True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
• Heavy duty Double molded, water resistant package
• Large backlit 40,000 count LCD with 40-segment bargraph
• Memory for storage and recall of three measurements

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH HD750: DIFFERENTIAL PRESSURE MANOMETER (5PSI)

• ±5psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH 42275 TEMPERATURE/HUMIDITY DATALOGGER KIT WITH PC INTERFACE

• Wide operating temperature range: -40°F to 185°F (-40°C to 85°C)
• Humidity range: 0 to 100% RH
• Records up to 16,000 readings (8,000 readings for each parameter)
• Use in storage containers, shipping vans, freezers and more
• Logs data for days, weeks or months - up to 1 year battery life

EXTECH MA200 400A AC CLAMP METER

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

EXTECH 475055 HIGH FORCE GAUGE DYNAMOMETER 100KG

• Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
• Basic accuracy 0.5%
• Tension or Compression, Peak hold and Zero functions
• Positive/Reverse display for easy easy readability
• Large LCD with backlight feature

EXTECH 380193 PASSIVE COMPONENT LCR METER

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

EXTECH 96VFL11: 1/4 DIN TEMPERATURE PID CONTROLLER WITH TWO RELAY OUTPUTS

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control