The EX355 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring distorted or noisy waveforms. Built-in Non-Contact AC Voltage Detector quickly checks for the presence of AC Voltage before testing. Features a 6000 count LCD display, data hold, min-max, relative mode, capacitance zero, auto power off, continuity and diode test. This meter will measure AC/DC voltage to 600 V and AC/DC current to 10 amps. Complete with test leads, general purpose bead wire temperature probe, manual and two AA batteries.

Features:

True RMS for accurate AC measurements
6000 count backlit LCD display
Low Impedance (LoZ) prevents false reading caused by ghost voltages
Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals
Built-in non-contact voltage detector (NCV) with LED indicator
Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Diode Test, Continuity
Data Hold, Min/Max/Max-Min, Auto Power Off
Relative Mode for Capacitance Zero and offset adjustment
Complete with test leads, two AAA batteries and general purpose bead wire temperature probe

More products EXTECH

EXTECH 382260 80W SWITCHING MODE DC POWER SUPPLY

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH MA620 600A TRUE RMS AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display

EXTECH CO10: CARBON MONOXIDE (CO) METER

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

EXTECH MN30 TRUE RMS AUTOSENSING™ MULTIMETER + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH SDL900 AC/DC MAGNETIC METER/DATALOGGER

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• Adjustable data sampling rate: 1 to 3600 seconds
• Memory stores 99 readings manually
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• N pole/S pole indicator

EXTECH 380363 DIGITAL HIGH VOLTAGE INSULATION TESTER

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

EXTECH LT45 COLOR LED LIGHT METER

• Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Manually store/recall up to 99 readings
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case