The ET15 is a Receptacle tester. Tests for faulty wiring in 3-wire receptacles. Detects 5 wiring faults. Lights indicate circuit condition. For 3-prong plug outlets.

Features:

Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
Lights indicate circuit condition
Standard North American 3-prong plug

More products EXTECH

EXTECH RH25 HEAT INDEX PSYCHROMETER

• Built-in multiparameter sensor measures Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Temperature, Dew Point and Wet Bulb
• User Programmable Heat Index/WBGT alarm
• MIn/Max/Average
• Data Hold, Auto Power Off with disable
• Complete with CR2032 battery

EXTECH DCP42 160W SWITCHING POWER SUPPLY

• Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
• At maximum current (10A), voltage is limited to 16V
• At maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push knob for fine and coarse tuning

EXTECH 381676A 9 FUNCTION PEN MULTIMETER + NCV

• Auto/Manual ranging pen-style multimeter
• Large 2000 count high contrast LCD display
• Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm
• Data Hold, Range Hold, Maximum Hold, Auto Power Off

EXTECH HD750: DIFFERENTIAL PRESSURE MANOMETER (5PSI)

• ±5psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting

EXTECH EX570 12 FUNCTION TRUE RMS INDUSTRIAL MULTIMETER WITH IR THERMOMETER

• Built-in Non-contact InfraRed Thermometer with laser pointer
• True RMS CAT III-1000V, CAT IV-600V rated with 0.06% basic DCV accuracy
• Heavy duty Double molded, water resistant package
• Large backlit 40,000 count LCD with 40-segment bargraph
• Memory for storage and recall of three measurements

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH AN320 LARGE VANE CFM/CMM ANEMOMETER/PSYCHROMETER PLUS CO2

• 4" (10cm) vane allows for more precise readings on larger size ducts
• Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
• Built-in thermistor for air temperature
• Multipoint and timed average calculations

EXTECH MA410 400A AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• Compact size allows measurments in tight locations
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Relative Mode for Capacitance Zero and Offset Adjustment

EXTECH USB200: USB POWER MONITOR

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

EXTECH HW30 HEATWATCH™ HUMIDITY/TEMPERATURE STOPWATCH

• User adjustable Heat Index alarm
• Stopwatch/chronograph mode with 1/100 second resolution
• Fastest/Slowest/Average Lap recall
• 99 lap counter with 30 lap/split memory
• 10 hour countdown timer with audible beeper warning for the last 5 seconds
• Programmable alarm
• Calendar mode displays day, month, and date