The PRT200 is a non-contact phase sequence tester that tests up to 1000 VAC with visual/audible indication. The tester has a 45 to 65Hz frequency range, features adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight, low battery warning and fully insulated alligator clips with wide jaws. The product has a CAT IV 600 Volt safety rating and is complete with a year warranty, three built-in 30 in. test leads with large color-coded alligator clips, 4 AA batteries, and a pouch case.

Features:

75 to 1000VAC input voltage with 45 to 65Hz frequency range
LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
Fully insulated alligator clips with wide jaws
Low battery warning
Complete with three built-in 30" test leads with large color-coded alligator clips, four AA batteries, and pouch case

More products EXTECH

EXTECH EX330 12 FUNCTION MINI MULTIMETER + NON-CONTACT VOLTAGE DETECTOR

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current

EXTECH MO290 PINLESS MOISTURE PSYCHROMETER + IR

• Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
• Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
• Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
• Select from multiple wood types and measurement ranges
• Easy to read, large dual display with backlit feature

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement

EXTECH PD20: THERMO-PEDOMETER

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

EXTECH MN30 TRUE RMS AUTOSENSING™ MULTIMETER + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH 480403: MOTOR ROTATION AND 3-PHASE TESTER

• Indicates rotation direction of the motor
• Determine rotation of a motor without contact
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
• Double molded durable housing
• Easy to use alligator clips with wide jaws

EXTECH 380320 ANALOG INSULATION TESTER

• Large easy to read analog display
• Three test voltages 250V, 500V, and 1000V
• Insulation Resistance to 400MOhm
• Lock Power On feature for extended test times

EXTECH DL150 TRUE RMS AC VOLTAGE/CURRENT DATALOGGER

• Measure True RMS AC Voltage (600V) or Current (200A)
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Normal, Peak and Capture (user-specified trigger level) recording modes