412400 Multifunction Process Calibrator sources and measures Thermocouples (J, K, and T), mA, mV, and V devices. The 24V Loop Supply drives current loads up to 1000 ohms. Memory for 5 user settable output values of each type for fast calibrations. Single/continuous step function for Voltage and Current. Comes complete with six AA batteries and calibration cable with spade lug terminals.

� Source 0 to 24mA with 0.01mA resolution

� Measure 0 to 50mA (0.1mA resolution)

� Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV

� Output 0 to 1999mV or 0 to 10.00V

� Measure 0 to 19.99V

� Single/continuous step function for Voltage and Current

� Self-contained 24V loop power supply drives current loads up to 1000Ohm

� 5 stored calibration values of each type for fast calibrations

� Complete with six AA batteries and calibration cable with spade lug terminals

More products EXTECH

EXTECH 96VFL11: 1/4 DIN TEMPERATURE PID CONTROLLER WITH TWO RELAY OUTPUTS

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control

EXTECH MO50 MOISTURE METER

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

EXTECH EMF450 ELECTROMAGNETIC FIELD METER DETECTOR

• Multi-Field measurements: Magnetic Field, Electric Field, and Radio Frequency (RF) Strength
• Magnetic Field Triple Axis Sensor (X, Y, Z)
• Audible alarm
• 2.4" (240 x 320 pixels) color TFT display
• Adjustable screen brightness (low, medium, high)
• Store up to 20 RF historical records

EXTECH CO100 DESKTOP INDOOR AIR QUALITY CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor
• Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
• User programmable Visible and Audible CO2 warning alarm

EXTECH 407910 HEAVY DUTY DIFFERENTIAL PRESSURE MANOMETER (29PSI)

• ±29psi with 0.02psi resolution
• 8 selectable units of measure
• Zero function for offset measurements
• Data Hold, Auto power off, and Min/Max functions

EXTECH MN26T MINITEC™ AUTORANGING DIGITAL MULTIMETER

• Large 2000 count LCD display
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Relative zero, Data Hold, Range Hold and Auto power off
• 10A fuse protection
• Overload protection and indication
• Includes protective holster with stand, general purpose Type K bead wire temperature probe, 2 AAA batteries and test leads

EXTECH 380193 PASSIVE COMPONENT LCR METER

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement

EXTECH CT40 CABLE IDENTIFIER/TESTER KIT

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

EXTECH LCR200: PASSIVE COMPONENT LCR METER

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits