Checking co levels is as easy as pushing just 1 button on the model C010, which measures up to 1,000 ppm. An audible indicator increases in tone starting at 35 ppm. The higher the concentration of co, the faster the alarm will sound. Above 200 ppm, the alarm will sound continuously. A backlight on the display can be used for low light areas. Additional features include: max hold, data hold, and auto-power-off. The meter comes complete with a 9-volt battery, protective holster, and case.

� Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm

� 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)

� Utilizes a stabilized electrochemical gas specific (CO) fast response sensor

� Audible alarm starts at 35ppm

� Backlight for low light conditions

More products EXTECH

EXTECH CT40 CABLE IDENTIFIER/TESTER KIT

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

EXTECH RHT50 HUMIDITY/TEMPERATURE/PRESSURE DATALOGGER

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

EXTECH EMF300 MICROWAVE LEAKAGE DETECTOR

• Ideal for measuring high frequency radiation levels emitted from household and commercial microwave ovens
• 0 to 1.999mW/cm² measurement range
• Audible alarm and overrange indicator
• Peak Hold
• Complete with 9V battery

INSPECTION VIDEO CAMERA BOREOSCOPE EXTECH BR150

• 9mm diameter camera head
• 39" (1m) flexible gooseneck cable retains configured shape
• High resolution
• mini waterproof (IP67) camera head
• four built-in bright LED lamps and dimmer function
• Display detaches for easy storage

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH EX230 12 FUNCTION MINI DIGITAL MULTIMETER WITH IR THERMOMETER

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

EXTECH MA620 600A TRUE RMS AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display

EXTECH BT100: BATTERY CAPACITY TESTER

• On-line testing without shutting down battery
• Built-in datalogger stores up to 999 tests
• Simultaneously measures battery resistance and voltage
• PC software for downloading readings to a PC

EXTECH SDL700 PRESSURE METER/DATALOGGER

• Accepts interchangeable transducers with ranges of 30, 150, 300psi (transducers sold separately)
• Meter automatically senses plug-in transducer's range and calibration
• Displays 10 types of pressure units
• Offset adjustment used for zero function to make relative measurements

EXTECH 380562 HIGH RESOLUTION PRECISION MILLIOHM METER (220VAC)

• 7 ranges for wide low resistance measurements
• High resolution to 0.01mOhm
• 1999 count display with 0.8" digits
• 4-wire test cable with Kelvin clip connectors
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection