Compact and precise, the Extech 380562 Milliohm Meter has 7 ranges and measures down to 0.01mO using 4-wire Kelvin clip test leads. Measurements are displayed on the unit's large 0.8", 1999-count LCD. Built-in comparator for Hi/Lo/Go resistance testing or selection. Complete with 4-wire cables with Kelvin clip connectors and power cord.

Features:

7 ranges for wide low resistance measurements
High resolution to 0.01mOhm
1999 count display with 0.8" digits
4-wire test cable with Kelvin clip connectors
Automatic zero
Built-in comparator for Hi/Lo/Go resistance testing or selection

More products EXTECH

EXTECH MF100 AC/DC MAGNETIC FIELD METER

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• N pole/S pole indicator
• Zero button for DC measurement
• Data Hold and Min/Max
• Auto power off with disable
• Complete with uniaxial magnetic probe sensor and protective cover, 9V battery, and hard carrying case

EXTECH EX410 8 FUNCTION PROFESSIONAL MULTIMETER

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

EXTECH HD400 HEAVY DUTY LIGHT METER

• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

EXTECH CT40 CABLE IDENTIFIER/TESTER KIT

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

EXTECH MA3018 3000A TRUE RMS AC FLEX CLAMP METER

• Measure AC Current up to 3000A
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 18" (45.7cm) clamp jaw easily wraps around bus bars and cable bundles
• 7.5mm cable diameter fits into tight spaces and around large conductors
• Measures AC Current in three ranges
• 3000 count backlit LCD display

EXTECH MN47 12 FUNCTION COMPACT MULTIMETER + NCV

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH EA31 EASYVIEW™ LIGHT METER

• Compact and rugged design with large display
• Low range model measures to 2,000Fc/ 20,000Lux
• Data Hold and Min/Max readings
• Auto power off

EXTECH SD500 HUMIDITY-TEMPERATURE DATALOGGER

• Dual LCD simultaneously displays Relative Humidity and Temperature readings
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with six AAA batteries, SD memory card, universal AC Adaptor, and mounting bracket