Checks for Carbon Dioxide (CO2) concentrations
Maintenance free NDIR (non-dispersive infrared) CO2 sensor
Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
User programmable Visible and Audible CO2 warning alarm
Measurement ranges:

CO2: 0 to 9999ppm
Temperature: 23 to 122°F (-5 to 50°C)
Humidity: 0.1 to 90%RH

Displays Year, Month, Date, and Time
Max/Min CO2 value recall function

Function	Range	Resolution	Accuracy
CO₂	0 to 9999ppm	1ppm	±75 ppm or ±5% of reading
Temperature	23 to 122°F (-5°C to 50°C)	0.1°	±1.5°C/2.7°F
Humidity	0.1 to 90.0%	0.1%	±5%
Display	LCD with backlighting
Sampling Interval:	2 seconds
Overload Indication:	"-OL-"
Sensor Type	CO₂: NDIR (non-dispersive infrared) technology
Operating Conditions	-5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Storage Conditions	-5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Power Supply	110V~220V AC, output 6.0V DC = 500mA (supplied)
Dimensions / Weight	117x102x102mm (4.6x4x4"); 204g (7.2 oz.)

More products EXTECH

EXTECH MN35 DIGITAL MINI MULTIMETER

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads

EXTECH MG310 DIGITAL INSULATION TESTER

• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)

EXTECH SD750 3-CHANNEL PRESSURE DATALOGGER

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

EXTECH MA200 400A AC CLAMP METER

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

EXTECH MA260 TRUE RMS 200A AC OPEN JAW CLAMP METER

• Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation
• For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages
• 0.6" (16mm) open jaw size
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Built-in non-contact voltage detector with LED indicator
• 10,000 count backlit LCD display

EXTECH 407736: DUAL RANGE SOUND LEVEL METER

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH DM220 MINI POCKET MULTIMETER WITH NON-CONTACT VOLTAGE DETECTOR

• Large high contrast 4000 count LCD display
• Non-Contact Voltage detection identifies live circuits
• Built-in Flashlight
• Measures AC/DC Voltage, AC/DC Current and Resistance, Frequency and Duty Cycle
• Diode Test and Continuity Beeper

EXTECH ET10: GFCI RECEPTACLE TESTER

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH MO57 PINLESS MOISTURE METER

• Pinless moisture measurement depth to <4" (100mm)
• Measures Moisture up to 99.9% for Wood and other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, tiles, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content

EXTECH CO50: DESKTOP CO (CARBON MONOXIDE) MONITOR

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air