475044 is a High Capacity Force Gauge with a 5 digit LCD display and peak hold. Exclusive load cell measurement transducer. Over-range, low battery and advanced function indicators. 20kg/44.1 lbs/196.1 Newtons measurement capacity. Selectable fast/slow response times. Basic accuracy of 0.5%. Display reverses to match viewing angle. Complete with tension rod, carrying case and 4 adapters (flathead, cone, chisel and hook for tension), and 6 AA batteries.

Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
Reversible display and fast/slow response mode
Exclusive load cell measurement transducer
Overrange, low battery and advanced function indication
Zero Adjust push-button and Peak Hold switch
Complete with hook adaptor for tension/compression adaptors, 5" extension rod, 6 AA batteries and carrying case

Specifications	Range
Range	44lbs, 20kg, 196 Newtons
Basic Accuracy (23°C)	±(0.5%)
Resolution	0.01lbs, 0.01kg, 0.05 Newtons
Overload capacity	30kg
Update Rate	Fast mode 0.2secs; Slow mode 0.6secs
Full scale deflection	2.00mm
Transducer type	Load cell
Dimensions/ Weight	8.5x3.5x1.8" (215x90x45mm)/ 1.4 lbs (650g)

More products EXTECH

EXTECH MO265 COMBINATION PIN/PINLESS MOISTURE METER

• Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
• %WME (wood moisture equivalent) pin moisture reading
• Relative pinless moisture reading for non-invasive measurement
• Digital LCD readout with backlighting feature and tri-color LED bargraph
• Quickly indicates the moisture content of materials
• Pinless measurement depth to 0.75" (22mm) below the surface

EXTECH 480400 PHASE SEQUENCE TESTER

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH 480826 TRIPLE AXIS EMF TESTER

• Three axis (X, Y, Z direction) electromagnetic field measurement
• Ideal for EMF measurements around power lines, electrical appliances and industrial devices
• Wide measuring ranges (3 ranges of µTesla or mGauss)
• Big digit LCD display, Data hold
• Easy to use remote probe
• Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

EXTECH MD10 NON-CONTACT MAGNET DETECTOR WITH BUILT-IN FLASHLIGHT

• Detects the presence of magnetic field without contact (AC, DC, and permanent magnets)
• Ideal for testing audio speakers and relays with coils and electrically controlled solenoid valves
• Blue LED lights up for visual magnetic field indication
• Magnetic field detection range: 63H, 98H, 401H, 810H
• Built-in bright flashlight with On/Off button
• Low battery indicator
• Complete with two AAA batteries

EXTECH MA3110 3000A TRUE RMS AC FLEX CLAMP METER

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles
• Autoranging AC Current
• Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity
• 8mm cable diameter fits into tight spaces and around large conductors

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

EXTECH 48VFL11 1/16 DIN TEMPERATURE PID CONTROLLER WITH ONE RELAY OUTPUT

• One relay output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic

EXTECH 42275 TEMPERATURE/HUMIDITY DATALOGGER KIT WITH PC INTERFACE

• Wide operating temperature range: -40°F to 185°F (-40°C to 85°C)
• Humidity range: 0 to 100% RH
• Records up to 16,000 readings (8,000 readings for each parameter)
• Use in storage containers, shipping vans, freezers and more
• Logs data for days, weeks or months - up to 1 year battery life