The compact-sized Extech MA410 400 amp True RMS autoranging AC/DC clamp meter offers plant maintenance techs, electrical contractors, HVAC troubleshooter, and DIYers a test instrument that delivers a high level of features and value. In addition to a host of core multimeter and current measurement capabilities, it also has a built-in, non-contact voltage (NCV) detector. The heart of the MA410 is a full-function digital multimeter. Measurement functions cover most types of troubleshooting over and above noninvasive current probe measurements: voltage, resistance, capacitance, frequency, duty cycle, diode and continuity tests. Even measure temperature with the supplied Type K bead wire probe. Comes with test leads, general purpose Type K wire temperature probe, two AAA batteries, carrying case, user manual, and manufacturer's one-year limited warranty.

� AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity

� Integrated Non-Contact Voltage Detector with LED alert

� Compact size allows measurments in tight locations

� 1.2" (30mm) jaw size for conductors up to 350MCM

� Relative Mode for Capacitance Zero and Offset Adjustment

� Data Hold and Auto Power Off

� Complete with test leads, general purpose Type K temperature probe, two AAA batteries, and carrying case

More products EXTECH

EXTECH CO50: DESKTOP CO (CARBON MONOXIDE) MONITOR

• Simultaneously displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings with date (Year, Month, Day) and time
• Visibly bright LED indicates active monitoring (green) or surpassed CO alarm threshold (red)
• Extra loud audible beeper alarm level meets UL 2013 Standard (>85dB @ 3 meters); default alarm threshold at 30ppm (user adjustable)
• Designed with Electrochemical CO sensor
• Record/Recall Max reading for CO concentration
• CO calibration function in fresh air

EXTECH 475055 HIGH FORCE GAUGE DYNAMOMETER 100KG

• Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
• Basic accuracy 0.5%
• Tension or Compression, Peak hold and Zero functions
• Positive/Reverse display for easy easy readability
• Large LCD with backlight feature

EXTECH MG300 13 FUNCTION WIRELESS TRUE RMS MULTIMETER/INSULATION TESTER

• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage

EXTECH RHT50 HUMIDITY/TEMPERATURE/PRESSURE DATALOGGER

• Datalogs up to 10,000 readings with a user programmable sample rate
• USB interface for easy set-up and data download
• Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar
• Selectable data sampling rate from 1 minute to 18 hours

EXTECH PQ3470-30 3000A POWER ANALYZER KIT: PQ3470 WITH PQ34-30

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH MO25 MOISTURE PEN

• Easy-to-use one button operation
• Data Hold and Auto power off
• Battery level check on power-up
• Complete with protective cap, built-in pocket clip, and one AAA battery

EXTECH EN150 11-IN-1 ENVIRONMENTAL METER WITH UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH 407026 HEAVY DUTY LIGHT METER WITH PC INTERFACE

• Simultaneous display of Foot Candles or Lux and lighting type
• Large 1.4" (1999 count) LCD display
• % displays differential from reference point
• "ZERO" Re-Calibration
• Utilizes precision photo diode and color correction filter
• Cosine and color corrected measurements

EXTECH MA150 200A MINI AC CLAMP METER + NCV DETECTOR

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off