Extech HD700 Differential Pressure Manometer (2psi)

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

 

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

 

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

 

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
• 1.5V and 9V Battery test function
• Convenient mini size with protective rubber holster and tilt stand
• Data Hold locks reading in the display
• Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads

 

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

 

• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Pinless moisture measurement depth to <1" (25mm)
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content
• Easy-to-use, compact-sized design

 

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

 

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

 

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
• Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature

 

• Integrated Bluetooth® connects with most Android devices to transmit readings for remote viewing
• Works with free Android App to display large, easy-to-read values up to 30ft (10m) away
• Low Pass Filter conditions the inputs to provide accurate Voltage and Frequency readings on motors, drives and other large electrical equipment that generate electrical noise
• Datalogging stores up to 2500 readings with date and time stamp