Extech EX540 12 Function Wireless True RMS Industrial MultiMeter/Datalogger

Code: Extech EX540


 

Datasheet PDF, 0.41 Mb

Description

MultiMeter/Datalogger (up to 9,999 readings) with Wireless PC interface (915MHz)

The EX540 offers wireless connectivity to your laptop or PC using a USB receiver with a range comparable to Bluetooth (10m/33 ft.). The EX540 transmits real-time data for monitoring, trending and analysis (using the included software) on one of two available frequencies (914MHz). Now, electrical professionals can monitor and data log readings at a safe distance from hazardous locations. Additionally, it is easier to perform remote tasks such as powering up a device from a control panel that is not nearby. From a time-saving perspective for laptop users, the EX540 permits a user to set up his or her laptop at a centralized location and then sequentially data log readings throughout a site without relocating the laptop. In addition to wireless data logging, EX540 can log up to 9,999 readings internally and also reads voltage, current, resistance, capacitance, frequency (with dual-range sensitivity for electrical and electronic work), duty cycle (dwell), continuity, diode testing (2.8 Volt), and even temperature (using its Type K thermistor bead probe). Complete with double-molded test leads, USB wireless receiver (914MHz), temperature probe, magnetic hanging strap, 9V battery and carrying case.

 

Features:

  • True RMS measurements for accurate AC Voltage and Current measurements
  • AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
  • Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
  • Data Acquisition Mode for real time data transmission directly to your PC
  • 1000V input protection on all functions
 

More products EXTECH

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

 

EXTECH PQ3470 3-PHASE GRAPHICAL POWER & HARMONICS ANALYZER/DATALOGGER

• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar

 

EXTECH EMF510 EMF/ELF METER

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

 

EXTECH RH25 HEAT INDEX PSYCHROMETER

• Built-in multiparameter sensor measures Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Temperature, Dew Point and Wet Bulb
• User Programmable Heat Index/WBGT alarm
• MIn/Max/Average
• Data Hold, Auto Power Off with disable
• Complete with CR2032 battery

 

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

 

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement

 

EXTECH EX470 12 FUNCTION TRUE RMS PROFESSIONAL MULTIMETER + INFRARED THERMOMETER

• True RMS DMM with 12 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
• Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
• Input fuse protection and mis-connection warning
• 20A max Current

 

EXTECH MO57 PINLESS MOISTURE METER

• Pinless moisture measurement depth to <4" (100mm)
• Measures Moisture up to 99.9% for Wood and other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, tiles, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content

 

EXTECH MG300 13 FUNCTION WIRELESS TRUE RMS MULTIMETER/INSULATION TESTER

• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage

 

EXTECH HT30 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement, and radiant heat
• Black Globe Temperature (TG) monitors the effects of direct solarradiation on an exposed surface
• In/Out Function displays the WBGT value with or without direct sun exposure