The 380360 is a 1000V digital tester with an automatic 3 minute test. Three test voltages of 250V, 500V and 1000V. Insulation Resistance to 2000MO. Automatic discharge when safety "Press to Test" button is released. Complete with 6 x AA batteries, heavy duty 2.5 ft. (0.8m) test leads, alligator clip, large probe and case with neck strap.

Features:

� Three test voltages of 250V, 500V and 1000V

� Insulation Resistance to 2000MOhm

� Safety Power Lock enables "hands free" operation for 3 minute test

� Automatic discharge when safety "Press to Test" button is released

� Continuity measurements to 200Ohm and Voltage to 600VAC

More products EXTECH

EXTECH DL150 TRUE RMS AC VOLTAGE/CURRENT DATALOGGER

• Measure True RMS AC Voltage (600V) or Current (200A)
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Normal, Peak and Capture (user-specified trigger level) recording modes

EXTECH MA3110 3000A TRUE RMS AC FLEX CLAMP METER

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles
• Autoranging AC Current
• Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity
• 8mm cable diameter fits into tight spaces and around large conductors

EXTECH EX503 10 FUNCTION HEAVY DUTY INDUSTRIAL MULTIMETER

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH SDL500 HYGRO-THERMOMETER/DATALOGGER

• Relative Humidity, Temperature, Dew Point, and Wet Bulb measurement
• Adjustable data sampling rate
• Stores 99 readings manually and 20M readings via 2G SD card
• Type K/J Thermocouple input for high temperature measurements
• Large backlit dual LCD display

EXTECH 407026 HEAVY DUTY LIGHT METER WITH PC INTERFACE

• Simultaneous display of Foot Candles or Lux and lighting type
• Large 1.4" (1999 count) LCD display
• % displays differential from reference point
• "ZERO" Re-Calibration
• Utilizes precision photo diode and color correction filter
• Cosine and color corrected measurements

EXTECH PQ3470-30 3000A POWER ANALYZER KIT: PQ3470 WITH PQ34-30

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)

EXTECH 382100 1200A 3-PHASE POWER ANALYZER/DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

EXTECH CT40 CABLE IDENTIFIER/TESTER KIT

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

EXTECH EX350 11 FUNCTION TRUE RMS MULTIMETER + NCV

• True RMS for accurate AC measurements
• 4000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm