Extech 382100 1200A 3-Phase Power Analyzer/Datalogger

Code: Extech 382100


 

Datasheet PDF, 0.32 Mb
 

Description

Datalogging Power Analyzer (up to 30,000 sets of measurements)

The 382100 is a 3-Phase Power Analyzer/Datalogger that saves data (up to 30,000 sets of measurements) on an SD card in Excel format for easy transfer to your PC. It provides a full system analysis with up to 35 parameters including: V (phase-to-phase), V (phase-to-ground) - A (phase-to-ground), KW / KVA / KVAR / PF (phase), KW / KVA / KVAR / PF (system), KWH / KVAH / KVARH / PFH (system), and Phase Angle. Readings are displayed on a large, dot matrix, sun-readable, backlit LCD. Comes with three current clamps, four voltage leads with alligator clips, eight AA batteries, SD memory card, Universal AC adapter (100 to 240V), case, and user manual.

 

 

Features:

  • Single phase, 3-phase/3-wire or 3-phase/4-wire systems
  • Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
  • Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
  • Current measurements to 1200A and Voltage measurements to 600V
  • MWH, MVAh, MVARh energy measurements
  • Adjustable CT ratio (1 to 600) and PT ratio (1 to 1000)
  • Automatically logs up to 30,000 sets of measurements with 2GB SD memory card
  • User-programmable sampling time from 2 to 7200 seconds
 

More products EXTECH

EXTECH EX355 12 FUNCTION TRUE RMS MULTIMETER + NCV

• True RMS for accurate AC measurements
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

 

EXTECH VFM200: VOC/FORMALDEHYDE METER

• Backlit LCD displays TVOC (Total Volatile Organic Compound) and HCHO (Formaldehyde) concentrations simultaneously in real-time
• Built-in fast response, high accuracy fuel cell Formaldehyde sensor
• Two selectable units of measure (ppm, mg/m3)
• Adjustable audible and visible high/low alarms
• Auto Power Off
• Complete with rechargeable battery and Universal AC Adaptor/Charger (multi-plugs US, EU, UK, and AU)

 

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

 

EXTECH HW30 HEATWATCH™ HUMIDITY/TEMPERATURE STOPWATCH

• User adjustable Heat Index alarm
• Stopwatch/chronograph mode with 1/100 second resolution
• Fastest/Slowest/Average Lap recall
• 99 lap counter with 30 lap/split memory
• 10 hour countdown timer with audible beeper warning for the last 5 seconds
• Programmable alarm
• Calendar mode displays day, month, and date

 

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

EXTECH 382202 18V/3A SINGLE OUTPUT DC POWER SUPPLY

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting

 

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

EXTECH EX230 12 FUNCTION MINI DIGITAL MULTIMETER WITH IR THERMOMETER

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

 

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

EXTECH EX410 8 FUNCTION PROFESSIONAL MULTIMETER

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements