Extech 480400 Phase Sequence Tester

Code: Extech 480400


 

Datasheet PDF, 0.14 Mb

Description

Displays graphical phase orientation

The 480400 Phase Sequence Tester has a 40 to 600-Volt rated range for testing phase orientation of 3-phase power sources over a 15 to 400Hz frequency range. Multiline graphical LCD indicates phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. No battery required. Comes complete with cable, three large color coded alligator clips, and pouch case.

 

Features:

  • Checks phase sequence and phase status
  • Tests up to 600VAC and displays graphical phase orientation on the large LCD
  • Double molded durable housing
  • Easy to use alligator clips with wide jaws
 

More products EXTECH

EXTECH 380260 AUTORANGING DIGITAL MEGOHMMETER

• 250V, 500V, and 1000V test voltages
• Insulation Resistance to 2000MOhm
• Lo Ohm function for testing connections
• Lock Power On Function for hands-free operation

 

EXTECH EX540 12 FUNCTION WIRELESS TRUE RMS INDUSTRIAL MULTIMETER/DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

 

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

 

EXTECH EX530 11 FUNCTION HEAVY DUTY TRUE RMS INDUSTRIAL MULTIMETER

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

 

EXTECH 380320 ANALOG INSULATION TESTER

• Large easy to read analog display
• Three test voltages 250V, 500V, and 1000V
• Insulation Resistance to 400MOhm
• Lock Power On feature for extended test times

 

EXTECH 480846 8GHZ RF ELECTROMAGNETIC FIELD STRENGTH METER

• Mobile phone base station antenna radiation
• RF power measurement for transmitters
• Wireless LAN (Wi-Fi) detection/installation
• Wireless communication applications (CW TDMA GSM DECT)
• Microwave leakage

 

EXTECH EX310 9 FUNCTION MINI MULTIMETER + NON-CONTACT VOLTAGE DETECTOR

• Manual ranging DMM with 9 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Battery test function for 1.5V and 9V batteries
• Large-digit 2,000 count LCD display

 

EXTECH DT500 LASER DISTANCE METER WITH BLUETOOTH®

• Integrated Bluetooth® connects with iOS devices to transmit readings for remote viewing
• Works with free Apple app to display large easy-to-read values up to 30ft (10m) away
• Measures up to 229ft (70m) with a target plate
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean Theorem
• Continuous measurement function with Min/Max distance tracking updates every 5 seconds