Extech DT200 Laser Distance Meter

Code: Extech DT200


 

Datasheet PDF, 0.19 Mb

Description

Laser measurements up to 115ft (35m)

The DT200 features a laser measurement accurate to 0.08 in. at 32 ft. Measures from 2 in. to 115 ft. (0.05 to 35 m). Historical Storage recalls the previous 10 records (measurements or calculations). Automatically calculates Area and Volume. Indirect measurement using Pythagorean Theorem. Continuous measurement function with Min/Max distance tracking updates every 5 seconds. Addition/Subtraction, Front or rear edge reference. Low battery indicator, Auto power off. Complete with carrying case and 2 AAA batteries.

 

·         Measures from 2" to 115' (0.05 to 35m)

·         Laser measurement accurate to 0.08 inches at 32 feet

·         Historical Storage recalls the previous 10 records (measurements or calculated results)

·         Automatically calculates Area and Volume

·         Indirect measurement using Pythagorean theorem

·         Continuous measurement function with Min/Max distance tracking updates every 5 seconds

·         Addition/Subtraction, Front or rear edge reference

·         Low battery indicator, Auto power off

·         Complete with carrying case and 2 AAA batteries

 

More products EXTECH

EXTECH DCP42 160W SWITCHING POWER SUPPLY

• Constantly calculates and adjusts the Voltage and Current limit points according to available maximum power (160W)
• At maximum current (10A), voltage is limited to 16V
• At maximum voltage (42V), current is limited to 3.8A
• Dual action rotary encoder control with push knob for fine and coarse tuning

 

EXTECH 380562 HIGH RESOLUTION PRECISION MILLIOHM METER (220VAC)

• 7 ranges for wide low resistance measurements
• High resolution to 0.01mOhm
• 1999 count display with 0.8" digits
• 4-wire test cable with Kelvin clip connectors
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection

 

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design

 

EXTECH MA250 200A AC CLAMP METER + NCV

• Built-in non-contact Voltage detector with LED alert to quickly check for the presence of live wires before testing
• 1.2" (30mm) jaw size for conductors up to 500MCM
• 4,000 count LCD display
• Multimeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity
• Relative Mode for Capacitance Zero and Offset Adjustment

 

EXTECH CT70: GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

EXTECH 380462 PRECISION MILLIOHM METER (220V)

• High accuracy and performance for low resistance measurements
• Large 0.7" (18mm) LCD 1999 count
• 4-wire cables with Kelvin clip connectors
• Manual zero display adjust
• Overrange indication
• Compact, durable field service

 

EXTECH MO257 PINLESS MOISTURE METER

• Non-invasive moisture content measurements in wood/building materials
• Measures relative moisture of various building materials including wood, particle board, carpeting, and ceiling tiles using non-invasive Pinless Technology
• Multifunction backlit triple LCD display
• Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
• High frequency sensing technology

 

EXTECH ET15 RECEPTACLE TESTER

• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

 

EXTECH MA150 200A MINI AC CLAMP METER + NCV DETECTOR

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off