Extech MO260 Combination Pin/Pinless Moisture Meter

Code: Extech MO260


 

Datasheet PDF, 0.19 Mb

Description

Monitor wood/building materials' moisture content without surface damage

MO260 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75" (22mm) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.

 

Features:

  • %WME (wood moisture equivalent) pin moisture reading
  • Relative pinless moisture reading for non-invasive measurement
  • Digital LCD readout with backlighting feature and tri-color LED bargraph
  • Quickly indicates the moisture content of materials
  • Pinless measurement depth to 0.75" (22mm) below the surface
  • Electro-magnetic sensing technology
  • Built-in calibration check, Low battery indication
  • Complete with 9V battery, replacement pins, protective cap, and pouch case
 

More products EXTECH

EXTECH EX230 12 FUNCTION MINI DIGITAL MULTIMETER WITH IR THERMOMETER

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

 

EXTECH MA620 600A TRUE RMS AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display

 

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

EXTECH MN47 12 FUNCTION COMPACT MULTIMETER + NCV

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

 

EXTECH LCR200: PASSIVE COMPONENT LCR METER

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

 

EXTECH CO250 PORTABLE INDOOR AIR QUALITY CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Calculates statistical weighted averages of TWA (8 hour time weighted average) and STEL (15 minute short term exposure limit)
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor

 

EXTECH EX410A: 8 FUNCTION PROFESSIONAL MULTIMETER

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

 

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

 

INSPECTION VIDEO CAMERA BOREOSCOPE EXTECH BR300

• 8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areas
• Handheld design for quick, easy, on-the-spot viewing in small openings
• 
• Completely submersible in water down to 1 meter for 1 hour
• Non-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape
• 2.7" (68mm) color TFT LCD monitor for detailed images

 

EXTECH RHT35 USB HUMIDITY/TEMPERATURE/BAROMETRIC PRESSURE DATALOGGER

• Compact size housing with built-in NTC thermistor, capacitive humidity sensor, and barometric pressure MEMS sensor designed with standard USB connector for easy data downloading to a PC
• 5-digit LCD display with battery life indicator
• User programmable settings: 6 languages, sample rate, start delay time, alarm delay time, high/low alarm range, and security feature
• Status Indication via Red and Green LEDs
• Start button begins continuous datalogging, which continues until memory is full at 48,000 readings (16K for each parameter), or when Stop button is pressed
• Bookmark 8 locations in a data recording log with a press of the Mark button