Extech 382270 Quad Output DC Power Supply

Code: Extech 382270


 

Datasheet PDF, 0.15 Mb

Description

4-in-1 DC Power Supply

382270 is a Quad Output DC Power Supply has two 0 to 30V/0 to 5A outputs plus two fixed auxiliary outputs of 3 to 6.5V/3A and 15V/1A. The two 30V outputs can be combined in parallel for 10A or in series for 60V. Comes complete with 4 pairs of test leads (banana plug to alligator clip) and an AC cord.

 

Features:

  • Two fully adjustable supplies combined with two auxiliary outputs
  • Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
  • Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A
 

More products EXTECH

EXTECH MG320 CAT IV INSULATION TESTER/TRUE RMS MULTIMETER

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

 

EXTECH PQ3450-2 200 AMP DATALOGGING POWER ANALYZER

• Adjustable Current Transformer CT (1 to 600) and Potential Transformer PT (1 to 1000) ratio for high power distribution systems
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar

 

EXTECH EX355 12 FUNCTION TRUE RMS MULTIMETER + NCV

• True RMS for accurate AC measurements
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Low Pass Filter (LPF) for accurate measurements of variable frequency drive signals

 

EXTECH CT70: GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

 

EXTECH EN150 11-IN-1 ENVIRONMENTAL METER WITH UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

 

EXTECH EX470 12 FUNCTION TRUE RMS PROFESSIONAL MULTIMETER + INFRARED THERMOMETER

• True RMS DMM with 12 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, TypeK & IR Temperature, Diode/Continuity, Duty Cycle
• Built-in non-contact InfraRed Thermometer with 8:1 distance to target ratio with 0.95 fixed emissivity
• Input fuse protection and mis-connection warning
• 20A max Current

 

EXTECH EMF510 EMF/ELF METER

• Measure EMF/ELF levels in milliGauss (mG) or microTesla (µT) up to 2000mG (200µT) with two ranges to choose from
• Built-in single axis sensor provides basic accuracy reading of ±5%
• 30 to 300Hz bandwidth
• Backlit display to view in dimly lit areas
• Data Hold and Min/Max functions

 

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

 

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement