Extech 380803 True RMS Power Analyzer Datalogger

Code: Extech 380803


 

Datasheet PDF, 0.23 Mb

Description

Compact, battery operated datalogging appliance tester for analyzing AC/DC power loads

The 380803 is a True RMS power analyzer and data logger. Appliance Tester/Power Analyzer simultaneously displays the Wattage, Power Factor or VA, Voltage or frequency (Hz), and Current (Amps) of the device or appliance tested. The built-in data logger can store up to 1,012 readings or you can save data directly to your PC using the built-in RS-232 port and included software. Additional features include: Max Hold, Data Hold, and overload protection. Battery or AC Adaptor Operation provides line isolation. Comes complete with 8 AA batteries, software, cable, power cord, AC Adaptor, and case.

 

Features:

  • Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
  • Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
  • True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
  • Plug device to be tested directly into the Power Analyzer
  • Max, Data Hold and Overload Protection
  • Battery or AC adaptor provides line isolation
  • Sampling (update) rate is 2.5 times/second
  • Software included to download and store data to a PC
  • Includes 117V AC adaptor for use in locations where 110-117V AC service is available. For areas where 220V is in use, a 220V AC adaptor (not included) is required or can be operated by batteries only.

 

 

More products EXTECH

EXTECH PQ3470 3-PHASE GRAPHICAL POWER & HARMONICS ANALYZER/DATALOGGER

• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar

 

EXTECH AN320 LARGE VANE CFM/CMM ANEMOMETER/PSYCHROMETER PLUS CO2

• 4" (10cm) vane allows for more precise readings on larger size ducts
• Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
• Built-in thermistor for air temperature
• Multipoint and timed average calculations

 

EXTECH EX310 9 FUNCTION MINI MULTIMETER + NON-CONTACT VOLTAGE DETECTOR

• Manual ranging DMM with 9 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Battery test function for 1.5V and 9V batteries
• Large-digit 2,000 count LCD display

 

EXTECH DL160 DUAL INPUT TRUE RMS AC VOLTAGE/CURRENT DATALOGGER

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check

 

EXTECH CO100 DESKTOP INDOOR AIR QUALITY CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor
• Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
• User programmable Visible and Audible CO2 warning alarm

 

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

EXTECH EX365 10 FUNCTION TRUE RMS MULTIMETER

• Ideal for Industrial/Commercial appplications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends

 

EXTECH 38073A MINI ANALOG MULTIMETER

• Easy to read color coded analog display
• Measure AC/DC Voltage, DC Current, Resistance and Decibel
• 4% full scale basic accuracy
• Battery test on 9V and 1.5V batteries
• Complete with test leads and 1.5V AA battery

 

EXTECH USB200: USB POWER MONITOR

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

 

EXTECH EN100 11-IN-1 ENVIRONMENTAL METER

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery