Standby Power Measurement (10mW to 100W) for desktop and notebook PCs, LCD TVs, AC adaptor/chargers
For testing products from 85 to 250VAC, 45 to 65Hz
Standard Power Measurement:
- 100mW to 1000W (110V)
- 100mW to 2000W (220V)
Power Quality Measurement (Watts, Power Factor, Voltage, Current, Harmonics)
Cost Function calculates cost per day, month, and year
99 memory locations for preset voltage and frequency output settings
User-programmable Over Current Protection
Programmable through the built-in RS-232 interface
Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
Complete with AC power cord, RS-232 to USB cable and software

More products EXTECH

EXTECH PD20: THERMO-PEDOMETER

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

EXTECH LT40 LED LIGHT METER

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

EXTECH EX410 8 FUNCTION PROFESSIONAL MULTIMETER

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 20A max Current
• Type K temperature measurements

EXTECH PRC10: CURRENT CALIBRATOR/METER

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix digital backlit LCD
• Standard banana I/O ports
• Large battery bank for extended work cycle

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH MA620 600A TRUE RMS AC CLAMP METER + NCV

• AC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Duty Cycle, Diode and Continuity
• Integrated Non-Contact Voltage Detector with LED alert
• 1.5" (40mm) jaw size for conductors up to 500MCM
• 6000 count, backlit LCD display

EXTECH 380580 BATTERY POWERED MILLIOHM METER

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100µOhm max resolution
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap

EXTECH 42275 TEMPERATURE/HUMIDITY DATALOGGER KIT WITH PC INTERFACE

• Wide operating temperature range: -40°F to 185°F (-40°C to 85°C)
• Humidity range: 0 to 100% RH
• Records up to 16,000 readings (8,000 readings for each parameter)
• Use in storage containers, shipping vans, freezers and more
• Logs data for days, weeks or months - up to 1 year battery life

EXTECH 401025 FOOT CANDLE/LUX LIGHT METER

• Accurately displays light level in terms of Fc or Lux over three ranges
• Select fast (1 second) or slow (2 seconds) response time
• Analog output of 1mV per count for capturing readings to a recorder

EXTECH 407736: DUAL RANGE SOUND LEVEL METER

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)