Extech PRC30: Multifunction Process Calibrator

Code: Extech PRC30


 

Datasheet PDF, 0.1 Mb
 

Description

Precision Current & Voltage & Thermocouple Source/Measure Calibrator

 

The PRC30 is a Multifunction Process Calibrator. This calibrator provides precision sourcing and measurements for thermocouples (eight types), current (mA), and voltage (mV and V) devices. Featuring 24 volt loop power, five user adjustable calibration presets, and temperature output in Fahrenheit, Celsius, and millivolts. Product includes test leads, alligator clips, thermocouple calibration cable, universal calibration cable, 100-240V AC universal adapter with 4 plugs, AA batteries, hard case, and user manual.

 

·         0 to 24mA (-25 to 125%) readout

·         24V DC power source for 2-wire current loop

·         0 to 20V DC calibration source

·         Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)

·         CJC - Cold Junction Compensation function

·         Up to five user adjustable calibration presets

·         Palm-sized double molded housing and large dot-matrix backlit LCD

·         High accuracy calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters, controllers or recorders

·         Displays output in terms of millivolts or temperature based on thermocouple tables

·         Zero adjustment, auto zero when power on and change mode

·         Standard banana I/O ports and mini thermocouple connector

·         Large battery bank for extended work cycle

·         External power adapter for continuous work cycle

·         Complete with test leads, alligator clips, calibration cables, 100V-240V AC universal adaptor with 4 plugs, six AA batteries, and hard carrying case

 

More products EXTECH

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

 

EXTECH EX542 12 FUNCTION WIRELESS TRUE RMS INDUSTRIAL MULTIMETER/DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

EXTECH MA200 400A AC CLAMP METER

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

 

EXTECH UV510 UVA LIGHT METER

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions

 

EXTECH 407736: DUAL RANGE SOUND LEVEL METER

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

 

EXTECH LT45 COLOR LED LIGHT METER

• Measure White, Red, Yellow, Green, and Blue LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Manually store/recall up to 99 readings
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

 

EXTECH EC210: COMPACT CONDUCTIVITY/TDS METER

• Compact Conductivity/TDS Meter Features
• Simultaneous display of Conductivity or TDS with Temperature
• Three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy
• Automatic Temperature Compensation
• Temperature compensation factor adjustable between 0 to 5.0% per °C
• Min/Max and Data Hold functions
• Auto Power Off with disable feature
• Use optional 1413?S Conductivity Standard (EC-1413-P) for calibration
• Complete with Conductivity cell and 39" (1m) cable, 9V battery, and soft case

 

EXTECH EA30 EASYVIEW™ WIDE RANGE LIGHT METER

• Compact and rugged design
• Widest range to 40,000Fc/ 400,000Lux is ideal for outdoor applications
• Large display with bargraph, Relative function for zero or difference from reference value
• Peak function captures short light pulse, Data Hold and Min/Max readings
• Auto power off, Zero function