Extech MO230 Pocket Moisture Meter

Code: Extech MO230


 

Datasheet PDF, 0.18 Mb

Description

Compact size, pin moisture meter with large LCD

This large dual graphical LCD displays moisture in wood and other building materials plus Air Temperature and Relative Humidity. Unique LCD with analog bargraph for simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, minimum/maximum moisture values, and programmable wet/dry indication. Use on wood, paper, wallboard, sheet rock, cardboard, plaster, concrete, and mortar. Memory contains 3 wood groups and four building material groups with calibrations for approximately 150 species of wood and 19 building material types. Index Mode with programmable high and low values that can be used to quickly locate moisture with comparative measurement. Replaceable threaded electrode pins, impact proof housing, Auto power off conserves battery energy, built-in battery check and measurement verification test. Complete with protective cap, replacement pins, and three CR-2032 button batteries

 

Features:

  • Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
  • Digital LCD readout with analog bargraph and numerical displays
  • Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
  • Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Memory contains 3 wood groups and 4 building material groups with calibrations for approximately 150 species of wood and 19 building material types
  • Index Mode with programmable high and low values can be used to quickly locate moisture with comparative measurement
  • Replaceable threaded measurement electrode pins
  • Impact proof housing
  • Auto power off conserves battery energy
  • Built-in battery check and measurement verification test
  • Complete with protective cap, replacement pins, and three CR-2032 button batteries
 

More products EXTECH

EXTECH MO290 PINLESS MOISTURE PSYCHROMETER + IR

• Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
• Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
• Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
• Select from multiple wood types and measurement ranges
• Easy to read, large dual display with backlit feature

 

EXTECH EX430 11 FUNCTION TRUE RMS PROFESSIONAL MULTIMETER

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 20A max Current

 

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

 


EXTECH MG320 CAT IV INSULATION TESTER/TRUE RMS MULTIMETER

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

 

EXTECH LRK10 LIGHTING RETROFIT KIT

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

 

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

EXTECH EX650 600A TRUE RMS AC CLAMP METER + NCV

• True RMS for accurate AC measurements
• 1.18" (30mm) jaw size accomodates conductors up to 350MCM
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Built-in non-contact voltage detector (NCV) with LED indicator
• Built-in LED flashlight for working in dimly-lit areas

 

EXTECH DT500 LASER DISTANCE METER WITH BLUETOOTH®

• Integrated Bluetooth® connects with iOS devices to transmit readings for remote viewing
• Works with free Apple app to display large easy-to-read values up to 30ft (10m) away
• Measures up to 229ft (70m) with a target plate
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean Theorem
• Continuous measurement function with Min/Max distance tracking updates every 5 seconds


INSPECTION VIDEO CAMERA BOREOSCOPE EXTECH BR300

• 8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areas
• Handheld design for quick, easy, on-the-spot viewing in small openings
• 
• Completely submersible in water down to 1 meter for 1 hour
• Non-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape
• 2.7" (68mm) color TFT LCD monitor for detailed images