Extech ET10: GFCI Receptacle Tester

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

 

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

 

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

 

• BR100: Video Borescope Inspection Camera
• 17mm camera diameter and 2.4" Color TFT LCD Monitor
• Mini water-proof (IP67) camera head for high resolution viewing
• Two bright LED lamps with dimmer to illuminate viewed object
• Glare-free close-up field of view
• Display detaches for easy storage

 

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

 

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

 

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

 

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles
• Autoranging AC Current
• Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity
• 8mm cable diameter fits into tight spaces and around large conductors

 

• Indicates rotation direction of the motor
• Determine rotation of a motor without contact
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
• Double molded durable housing
• Easy to use alligator clips with wide jaws