Extech MO50 Moisture Meter

Code: Extech MO50


 

Datasheet PDF, 0.29 Mb

Description

Compact Pin Moisture Meter

The MO50 is a compact pin moisture meter. MO50 displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete and mortar. This product is complete with pins (4), protective cap and 9V battery.

 

Features:

  • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Audible Alert - tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with pins (4), protective cap, and 9V battery
 

More products EXTECH

EXTECH CO10: CARBON MONOXIDE (CO) METER

• Easy to read 1999 count backlit displays CO levels from 0 to 1000ppm
• 1ppm resolution with ±5% or ±10ppm basic accuracy (whichever is greater)
• Utilizes a stabilized electrochemical gas specific (CO) fast response sensor
• Audible alarm starts at 35ppm
• Backlight for low light conditions

 

EXTECH UV510 UVA LIGHT METER

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions

 

EXTECH CT80: AFCI, GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

EXTECH MG500 DIGITAL HIGH VOLTAGE INSULATION TESTER 10KV

• High test voltages up to 10kV with Insulation Resistance to 500GOhm
• Polarization Index (PI) measurement
• Dielectric Absorption Ratio (DAR) measurement
• EnerSave™ limits test duration to 10 seconds to save energy
• Complete with built-in heavy duty carrying case with cover, test leads, alligator clips, and 8 x C batteries

 

EXTECH MO57 PINLESS MOISTURE METER

• Pinless moisture measurement depth to <4" (100mm)
• Measures Moisture up to 99.9% for Wood and other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, tiles, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases
• Icons display low, medium and high levels of moisture content

 

EXTECH EX310 9 FUNCTION MINI MULTIMETER + NON-CONTACT VOLTAGE DETECTOR

• Manual ranging DMM with 9 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Battery test function for 1.5V and 9V batteries
• Large-digit 2,000 count LCD display

 

EXTECH MO297 PINLESS MOISTURE PSYCHROMETER WITH IR THERMOMETER AND BLUETOOTH METERLINK™

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
• Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature

 

EXTECH EX540 12 FUNCTION WIRELESS TRUE RMS INDUSTRIAL MULTIMETER/DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

 

EXTECH 412400: MULTIFUNCTION PROCESS CALIBRATOR

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V

 

EXTECH MA150 200A MINI AC CLAMP METER + NCV DETECTOR

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off