The MA260 is a True RMS 200A AC Open Jaw Clamp Meter. The MA260 has a built in NCV detector and can measure up to 200A in its 0.6 in. open jaw. True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with test leads and two AAA batteries. UL listed with a CAT IV 600V safety rating.

� Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation

� For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages

� 0.6" (16mm) open jaw size

� True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms

� Built-in non-contact voltage detector with LED indicator

� 10,000 count backlit LCD display

� Smart Data Hold freezes the reading on the display and automatically changes if a new reading is larger than 50 counts

� Auto Power Off with disable

� Slim housing construction with built-in test lead holders

� Complete with test leads and two AAA batteries

More products EXTECH

EXTECH 407026 HEAVY DUTY LIGHT METER WITH PC INTERFACE

• Simultaneous display of Foot Candles or Lux and lighting type
• Large 1.4" (1999 count) LCD display
• % displays differential from reference point
• "ZERO" Re-Calibration
• Utilizes precision photo diode and color correction filter
• Cosine and color corrected measurements

EXTECH 382213: DIGITAL TRIPLE OUTPUT DC POWER SUPPLY

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator

EXTECH 380193 PASSIVE COMPONENT LCR METER

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
• Secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

EXTECH MA3110 3000A TRUE RMS AC FLEX CLAMP METER

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Flexible 11" (28cm) clamp jaw easily wraps around bus bars and cable bundles
• Autoranging AC Current
• Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Diode/Continuity
• 8mm cable diameter fits into tight spaces and around large conductors

EXTECH 407910 HEAVY DUTY DIFFERENTIAL PRESSURE MANOMETER (29PSI)

• ±29psi with 0.02psi resolution
• 8 selectable units of measure
• Zero function for offset measurements
• Data Hold, Auto power off, and Min/Max functions

EXTECH 380360 DIGITAL MEGOHMMETER

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

EXTECH SDL400 LIGHT METER/DATALOGGER

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate

EXTECH RT30: WIRELESS AC CIRCUIT IDENTIFIER (914MHZ) WITH EXTERNAL PROBE

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

EXTECH EX330 12 FUNCTION MINI MULTIMETER + NON-CONTACT VOLTAGE DETECTOR

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current