382280 is a Programmable 200 Watt DC Power Supply that has an adjustable 40V/5A output plus two fixed outputs (5V/2A and 3.3V/3A) and memory for 200 setups for repetitive product tests. It features high stability with low ripple and noise, 0 to 60 second programmable overload delay timer, selectable Constant Current/Constant Voltage, and a bi-directional PC interface that allows setup and read back using virtually any PC communications program.

Features:

High resolution (1mV and 1mA) user programmable output
Selectable constant Voltage or Current modes
0 to 60 second programmable overload delay timer
Storage/Recall memory
High stability with low ripple and noise
Bi-directional PC interface commands allow setup and readback using Windows^® HyperTerminal or similar programs

More products EXTECH

EXTECH RH520A-220 HUMIDITY+TEMPERATURE CHART RECORDER WITH DETACHABLE PROBE (220V)

• Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis
• LCD indicates percentage of memory remaining
• Comes with 220V AC power supply

EXTECH 475055 HIGH FORCE GAUGE DYNAMOMETER 100KG

• Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
• Basic accuracy 0.5%
• Tension or Compression, Peak hold and Zero functions
• Positive/Reverse display for easy easy readability
• Large LCD with backlight feature

EXTECH SDL470 UVA/UVC LIGHT METER/DATALOGGER

• UVA probe captures long-wave 365nm UV irradiance measurements under a UVA (black light) source
• UVC probe captures short-wave 254nm UV irradiance measurements under a UVC light source
• Cosine correction filter and metal housing
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• Offset adjustment used for zero function or to make relative measurements
• Adjustable data sampling rate from 1 to 3600 seconds

EXTECH 382260 80W SWITCHING MODE DC POWER SUPPLY

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH 380320 ANALOG INSULATION TESTER

• Large easy to read analog display
• Three test voltages 250V, 500V, and 1000V
• Insulation Resistance to 400MOhm
• Lock Power On feature for extended test times

EXTECH CT70: GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH CO15: CARBON MONOXIDE (CO) METER

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

EXTECH HT30 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement, and radiant heat
• Black Globe Temperature (TG) monitors the effects of direct solarradiation on an exposed surface
• In/Out Function displays the WBGT value with or without direct sun exposure

EXTECH MO297 PINLESS MOISTURE PSYCHROMETER WITH IR THERMOMETER AND BLUETOOTH METERLINK™

• Quickly indicates the moisture content of materials with Pinless technology without damaging the surface
• Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length)
• Manually store/recall up to 20 labeled readings
• Works on multiple wood types and other building materials
• Easy to read, large dual display with automatic backlight feature