Frequency range :9KHz~1.6GHz;
Optimal sensitivity: -161dBm;
RBW:10Hz to 1MHz.
High protection portable design, sturdy and durable
can be used in laboratory, more suitable for field mobile use
built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
USB/LAN communication, easy for long-range control.
5.6 inch highlight color display, 640*480 resolution, waveform display clearly.

Features:

Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
Optimal sensitivity: -161dBm RBW:10Hz to 1MHz
IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
5.6 inch highlight color display, 640*480 resolution, waveform display clearly.
HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
Standard spectrum feature. It can analyze the signal time stability, and find out lacunar signal in communication system accurately.
Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
HAS2000 Series has least RBW in the same level of analyzers, and can easily confirm, distinguish and measure two similar signals.
The 5.7 inch highlight color display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
Its PC software can achieve the management and storage of testing data.
HSA2000 Series site measurement application.

Alte produse HANTEK

HANTEK DSO8000 OSCILOSCOP PORTABIL CU MULTIMETRU

• Excellent Industrial Design. Direct key for Each Channel, time base, Trigger and DMM, easy to operate.
• Large 5.7 inch TFT Color LCD Display, LED backlight, Display clearly.
• USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option; Easy to control by PC or long-distance.
• Battery Power Operation (Installed) Industrial Design.
• Save waveform in the following: jpg/bmp graphic file, MS excel/word file.

HANTEK MSO5000D OSCILOSCOP DIGITAL CU ANALIZOR LOGIC

• 200/100/60MHz bandwidth
• 1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 1M

HANTEK DSO4004B OSCILOSCOAPE DIGITALE DE BANC

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
• Support a variety of SCPI remote control command
• Support optional RS232 port, LAN port. (Optional)

HANTEK 6000BD OSCILOSCOAPE PE USB

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.

HANTEK PSO2020 OSCILOSCOP USB TIP STILOU CREION

• Powered by USB Interface. Plug and Play Device. Automatically Measurement Function. Easy for Operation;
• Change the Voltage/Time Division Gear with Single Hand. No Need to Operate on the Computer;
• Built-in LED Light, Providing Better Light for User's Convenient Operation in Dark Environment;
• Light Weight and Portable. Suitable for Human Body's Design;

HANTEK IDSO OSCILOSCOP USB

• Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• FFT spectrum analyzer
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.

HANTEK HSA2016 ANALIZOR DE SPECTRU PORTABIL 1.6GHZ

• Frequency range: 9KHz-1.6GHz (tunable to 9KHz) AC Coupled
• Optimal sensitivity: -161dBm RBW:10Hz to 1MHz
• IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
• built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
• 5.6 inch highlight color display, 640*480 resolution, waveform display clearly.

HANTEK DSO8000E OSCILOSCOP PORTABIL SCOPMETRU CU MULTIMETRU SI GENERATOR

• High bandwidth 70MHz-200MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth.
• 25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer
• 6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function.
• FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application.

HANTEK AC/DC CURRENT CLAMP CC-65 CLESTE CURENT CU EFECT HALL

• AC/DC frequency range: Up to 20 kHz
• Effective Measurement Range: 20mA to 65A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.

HANTEK365A/B/C/D/E/F SISTEM DE ACHIZITII DE DATE

• Long time record voltage, current, resistance, capacitance and on-off etc. in real time, and create trend curves.
• Plug play USB interface.
• Simple, handy and flexible control software.
• Software support: Windows 2000, Windows 7, Windows XP, Win8.