Autorizare ANRE | Fisiere

• 6.5 digit resolution
• 0.002% 90-day basic accuracy
• 2000 readings/second at 4-1/2 digits

 

• 6.5 digit
• 38 ppm accuracy
• 11 measurement functions cover most commonly measured parameters

 

• 7.5 digit true resolution
• 8k Memory(optional 32k or 128k)
• Exceptional measurement integrity with high speed
• Broad range of built-in measurement functions

 

• 7.5 digit resolution
• 100nV rms noise floor
• 7ppm DCV repeatability

 

• 8.5 digit true resolution
• 8k Memory(optional 32k or 128k)
• Exceptional measurement integrity with high speed
• Broad range of built-in measurement functions

 

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 4Vrms single-ended or 8Vrms differential output
• Identifies peak spectral components(2015-P model)

 

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 9.5Vrms single-ended or 19Vrms differential output
• Identifies peak spectral components(2016-P model)

 

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements

 

• 10fA resolution
• 5-1/2 digit resolution
• <200µV burden voltage
• measure currents from 20fA to 20mA

 

• 10fA resolution
• 5-1/2 digit resolution
• <200µV burden voltage
• measure currents from 20fA to 20mA
• source voltage from 200µV to 505V

 

• Dual-channel instrument for optical power measurements, beam measurements, and nanoscale materials and device research
• ±100V source for bias requirements
• Measure photodetector current from 1fA to 20mA
• 1fA current measurement resolution

 

• <1fA noise
• >200TO input impedance on voltage measurements
• Charge measurements from 10fC to 20µC
• High speed -- up to 1200 readings/second

 

• Make low noise measurements at high speeds
• typically just 15 nV p-p noise at 1s response time
• 40..50 nV p-p noise at 60ms

 

• 0.4 fA p-p (4E - 16 A) noise
• Remote PreAmp can be located at the signal source to minimize cable noise
• Up to 6½-digit resolution

 

• Combines functions of DMM, switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control plug-in modules
• Up to 200 differential input channels

 

• Combines functions of DMM, switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control plug-in modules
• Up to 200 differential input channels

 

• Multiplexer, matrix, and I/O cards
• Relay closures automatically counted and stored in each card's onboard memory

 

• 5.5 digit resolution
• 0.015% Basic V dc accuracy
• 200 mV to 1000 Vdc range with up to 10 µV resolution
• 200 µA to 10 A current range with up to 1 nA resolution
• 200 O to 100 M? ohms range with up to 1 mO resolution

 

• 6.5 Digit resolution
• 0.0035% Basic Vdc accuracy
• 100 mV to 1 kV voltage range with up to 100 nV resolution
• 100 µA to 10 A current range with up to 100 pA resolution
• 10 ? to 1 G? ohms range with up to 10 µ? resolution

 

• 6.5 Digit resolution
• 0.0024% Basic Vdc accuracy
• 100 mV to 1 kV voltage range with up to 100 nV resolution
• 100 µA to 10 A current range with up to 100 pA resolution
• 10 ? to 1 G? ohms range with up to 10 µ? resolution
• Capacitance and temperature measurements