Electrometru programabil Keithley 6514

• Multiplexer, matrix, and I/O cards
• Relay closures automatically counted and stored in each card's onboard memory

 

• 32 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA

 

• Five instruments in one (IV Source, IVR Measure)
• Six models: 20 - 100W DC, 1000W pulsed, 1100V to 1uV, 10A to 10pA
• Source and sink (4-quadrant) operation
• 0.012% basic measure accuracy with 5½-digit resolution

 

• 7.5 digit resolution
• 100nV rms noise floor
• 7ppm DCV repeatability

 

• 0.4 fA p-p (4E - 16 A) noise
• Remote PreAmp can be located at the signal source to minimize cable noise
• Up to 6½-digit resolution

 

• Measures resistances up to 10000TO
• 1fA - 20mA current measurement range
• <20 µV burden voltage on lowest current ranges
• 200 TO input impedance

 

• USB 2.0 and USB 1.1, true plug-and-play compatibility
• 16 SE/pseudo-DI/ 8 DI analog input channels
• 16-bit resolution
• High and low programmable gains
• Input/output speeds up to 50kS/s
• Up to 17 digital lines for monitoring or control

 

• Combines functions of DMM, switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control plug-in modules
• Up to 200 differential input channels

 

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements

 

• Alegeți dintre trei electrometre sensibile pentru măsurători precise de rezistență ridicată și curent scăzut