Agilent 16802A Portable Logic Analyzer 68 channels

Code: Agilent 16802A


 

Datasheet PDF, 1.09 Mb

Description

  • 68-channel portable logic analyzer
  • 4 GHz (250 ps) timing zoom with 64 K memory
  • 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
  • 500 MHz transitional timing
  • up to 450 MHz State clock rates
  • up to 500 Mb/s Data rates
  • up to 32 M acquisition memory depth
  • 15-inch (38.1 cm) color display with touch screen available(option 103)
  • Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
  • Automated threshold/sample position setup for accurate measurements on high-speed buses
  • Simultaneous eye diagrams on all channels identify problem signals quickly
  • Selectable memory depths: 1 M, 4 M, 16 M, 32 M
 

Recommended options

16800A-0B3

Service Manual

16800A-103

Front Panel with 15 inch display and touchscreen

16800A-109

External removable hard drive for 16800 series logic analyzers

16802A-001

Standard 1 M acquisition memory depth

16802A-004

Increase acquisition memory depth to 4M

16802A-016

Increase acquisition memory depth to 16M

16802A-032

Increase acquisition memory depth to 32M

16802A-500

Increase maximum state speed to 500 Mb/s

16802A-A6J

ANSI Z540 Compliant Calibration

E5346A

Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable

E5383A

Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable

E5385A

Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable

E5394A

Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5394A-001

Retention Module

E5396A

Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5396A-001

Retention Modules

E5403A

Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes

E5404A

Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

 

More products KEYSIGHT

MICROWAVE SWITCH DUAL MODULE AGILENT 34946A

• Two SPDT terminated switches
• 4 GHz, 20 GHz, or 26.6 GHz options
• High isolation, low VSWR
• Up to 50W switching

 

AGILENT U3402A DIGITAL PRECISION MULTIMETER 5.5 DIGIT

• 5.5 digit
• 0.012% DCV accuracy
• 120,000 counts resolution

 

AGILENT 4285A PRECISION LCR METER 75 KHZ..30 MHZ

• 75 kHz to 30 MHz in 100 Hz steps
• 0.1% Accuracy
• Measurements include |Z|-theta, |Y|-theta, R-X, G-B, C-D, Q, ESR, G, Rp, L-D, deviation, and deviation %

 

AGILENT N9000A CXA SIGNAL SPECTRUM ANALYZER 9 KHZ..3 GHZ OR 7.5 GHZ

• 9 kHz to 3.0 or 7.5 GHz Frequency range
• 10 MHz (standard), 25 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Standards-based PowerSuite: channel power, OBW, ACP, CCDF, SEM

 

AGILENT 33210A FUNCTION / ARBITRARY WAVEFORM GENERATOR 10 MHZ

• 10 MHz sine and square waveforms
• Ramp, triangle, noise, and DC waveforms
• Option 002 provides 14-bit, 50 MSa/s, 8-Kpoint arbitrary waveform generation

 

PXI MULTIPLEXER MODULE 64-CHANNELS 100V/1A AGILENT M9101A

• 64-channel, high-density 2-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• High-speed 500 usec reed relays
• Break-before-make or simultaneous switch closures

 

PXI RF MATRIX SWITCH 3GHZ 1 X 8, 75 OHM AGILENT M9152A

• RF signal routing to 3 GHz for 75 ohm applications
• 1x8 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 52 dB isolation at 1 GHz

 

DIGITAL OSCILLOSCOPE 2 X 100 MHZ & LOGIC ANALYZER 16 CHANNELS AGILENT MSO7012B

• 100 MHz bandwidth
• 2 GSa/s sample rate
• 2 analog plus 16 digital channels
• Standard 8 Mpts MegaZoom III deep memory

 

DIGITAL OSCILLOSCOPE 4 X 100 MHZ AND LOGIC ANALYZER 8 CHANNELS AGILENT MSOX2014A

• 100 MHz bandwidth
• 4 analog channels plus 8 digital channels
• 1GSa/s per channel sample rate

 

DIGITAL OSCILLOSCOPE 4 X 70 MHZ AGILENT DSOX2004A

• 70 MHz bandwidth
• 4 analog channels
• 1GSa/s per channel sample rate