Agilent N9030A PXA Signal Spectrum Analyzer 3 Hz..3.6 / 8.4 / 13.6 / 26.5 GHz

Code: Agilent N9030A PXA


 

Datasheet PDF, 0.63 Mb

Description

  • 3 Hz to 3.6, 8.4, 13.6, or 26.5 GHz
  • 10 MHz (standard), 25, 40, or 140 MHz analysis bandwidth
  • Basic EMI precompliance measurement capability available, including CISPR 16-1-1 bandwidths, detectors, amplitude correction factor, band preset, tune & listen at marker, and limit lines
  • internal preamplifier options up to 26.5 GHz
  • ±0.19 dB absolute amplitude accuracy
  • +22 dBm third order intercept (TOI)
  • -172 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
  • -83 dB (-88 dB nominal) W-CDMA ACLR dynamic range (with noise correction on)
  • Supports over 25 measurement applications, covering cellular communication, wireless connectivity, digital video, and general purpose
  • Advanced analysis of more than 70 signal formats; software runs inside the PXA
  • MATLAB® data analysis software for general purpose data analysis, visualization, and measurement automation
  • Agilent's PowerSuite one-button power measurements included as standard
  • Automation & Communication Interface
  • LXI class C compliant, SCPI and IVI-COM
  • USB 2.0, 1000Base-T LAN, GPIB
  • Common X-Series user interface/Open Windows® XP operating system
 

Recommended options

  • Option 503   3 Hz to 3.6 GHz
  • Option 508   3 Hz to 8.4 GHz
  • Option 513   3 Hz to 13.6 GHz
  • Option 526   3 Hz to 26.5 GHz
 

More products KEYSIGHT

PXI RF MATRIX SWITCH 3GHZ DUAL 1 X 4, 50 OHM AGILENT M9146A

• RF switching to 3 GHz
• Dual 1x4 50 ohm RF switch multiplexer to 3GHz
• Off channel termination
• 30V, 1A, 1W switching
• 60 dB isolation at 1 GHz

 

AGILENT 4338B MILIOHMETER 1 KHZ

• Low and selectable test signal current: 1uA to 10 mA
• Wide measurement range: 10u ohm to 100 k ohm
• High-speed measurement: 34 ms
• 1 kHz ac measurement
• 10u ohm resolution

 

PXI SWITCH SPDT MODULE 50-CHANNELS 100VRMS/1A AGILENT M9132A

• General purpose switching to control external devices or
• switching in light loads or power supplies
• 50-channel SPST switch
• 100Vrms
• 1A switch/carry current
• 25W max power

 

DIGITAL OSCILLOSCOPE 2 X 500 MHZ & LOGIC ANALYZER 16 CHANNELS AGILENT MSO7052B

• 500MHz bandwidth
• 4 GSa/s sample rate
• 2 analog plus 16 digital channels
• Standard 8 Mpts MegaZoom III deep memory

 

AGILENT 33220A ARBITRARY WAVEFORM GENERATOR 20 MHZ

• 20 MHz Sine and Square waveforms
• 14-bit, 50 MSa/s, 64 K-point Arbitrary waveforms
• 5 MHz pulse waveforms with variable rise/fall times
• Pulse, Ramp, Triangle, Noise, and DC waveforms

 

USB THERMOCOUPLE INPUT MODULE 31-CHANNELS AGILENT U2802A

• Up to 31 thermocouple inputs
• Configurable for thermocouple or voltage input mode independently
• Voltage input range up to 10V
• Supports thermocouple type J, K, R, S, T, N, E and B

 

AGILENT 81130A 81132A PULSE DATA GENERATOR 660 MHZ

• 1 kHz to 660 MHz
• 1 or 2 Channels(order 2 x 81132A modules)
• 500 ps typ.fixed
• Up to 2.5 Vpp into 50 O

 

PXI MICROWAVE SWITCH MODULE DC-26.5GHZ AGILENT M9156C

• Hybrid Dual Transfer Switch
• Broadband from DC to 26.5 GHz
• Unmatched isolation 92 dB at 8 GHz
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical

 

AGILENT E3640A E3641A E3642A E3643A E3644A E3645A E3646A E3647A E3648A E3649A DC PROGRAMMABLE POWER SUPPLIES 30-100W

• Single and dual outputs
• Dual range output
• 30 W to 100 W output power
• GPIB and RS-232 standard

 

4 X 8 TWO-WIRE MATRIX MODULE AGILENT 34904A

• 4 x 8 Matrix Switch
• 32 two-wire crosspoints
• 300 V, 1 A switching