7.5 digit resolution
100nV rms noise floor
7ppm DCV repeatability
Autoranging DMM
Built-in 10-channel scanner mainframe
Dry circuit and low power measurement mode
Built-in ratio measurement function
15 measurement functions including support for RTD and thermocouple temperature measurements

More products Files

PULSE PATTERN GENERATOR 165 MHZ KEITHLEY 3401-F / 3401-R

• 1 mHz - 165 MHz frequency output range
• 1 channel
• 3 ns - 1000 s pulse width range
• 10 V amplitude into 50 O, 20 V into 1 k O

DATA ACQUISITION CARD PCI 32-CHANNELS 1.25MSA/S KEITLHEY KPCI-3110

• 12-bit resolution
• Maximum sampling rate of 1.25MS/s
• 32 single-ended or 16 differential analog inputs
• 2 analog outputs, waveform quality, up to 500kS/s
• 16 high speed digital I/O lines, up to 3MHz

LOW VOLTAGE NANOVOLTMETER KEITHLEY 2182A

• Make low noise measurements at high speeds
• typically just 15 nV p-p noise at 1s response time
• 40..50 nV p-p noise at 60ms

2600B 2601B 2611B 2604B 2614B 2602B 2612B 2634B 2635B 2636B SURSMETRU DE PRECIZIE

• 2601B, 2602B, 2604B System Sourcemeter SMU Instruments
• The 2601B, 2602B, and 2604B are 40W DC / 200W Pulse SMUs with 10 A pulse, 3A to 100 fA and 40 V to 100 nV DC capabilities.

KEITHLEY 2182A NANOVOLTMETER

• The two-channel Model 2182A Nanovoltmeter is optimized for making stable, low noise voltage measurements and for characterizing low resistance materials and devices reliably and repeatably

KEITHLEY 6400 6482 6485 6487 PICO-AMMETER PICOAMMETER

• The cost-effective 5½-digit Model 6485 Picoammeter can measure currents from 10fA to 20mA, at speeds up to 1000 readings per second.

PCI BOARD DIGITAL I/O 32-CHANNELS OPTICALLY ISOLATED KEITHLEY KPCI-PIO32IOA

• 32 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA

DIGITAL SOURCE METER 6.5 DIGIT AIRBAG TEST SYSTEM KEITHLEY DMM 2000

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements

PCI BOARD 8-ANALOG + 32 DIGITAL OUTPUT KEITHLEY KPCI-3130

• 20mA output current without power supply
• 8 analog outputs
• 32 high-current digital I/O lines (user configurable)

PULSED LASER DIODE TEST SYSTEM KEITHLEY 2520

• Simplifies laser diode LIV testing prior to packaging or active temperature control
• Integrated solution for in-process LIV production testing of laser diodes at the chip or bar level
• Sweep can be programmed to stop on optical power limit
• Programmable pulse on time from 500ns to 5ms up to 4% duty cycle
• Pulse capability up to 5A, DC capability up to 1A