100 kHz to 3 GHz or 6 GHz Frequency range
200 MHz RF bandwidth IQ modulator
- 133 dBc Very low SSB phase noise of typ. (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth)
Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
Excellent ACLR performance of typ. +69 dB for 3GPP FDD (test model 1, 64 DPCHs)
High-stability reference oscillator as standard
High level repeatability
Very short frequency and level setting times (<2 ms); only 450 µs in List mode
Electronic attenuator up to 6 GHz over the full level range
Flexible high speed measurements with RF List mode and multisegment waveforms
Support of EUTRA/LTE signal generation
Support of WiMAX™ IEEE 802.16-2004/Corr1-2005, 802.16e-2005, and WiBro
Four code channels in realtime for 3GPP FDD, support of HSPA and HSPA+
Mixed frames with GSM, EDGE and EGPRS2 slots in one frame (with same symbol rate per frame)
Baseband generator with universal coder for realtime signal generation
Arbitrary waveform generator with 16 Msample, 64 Msample or 128 Msample
Arbitrary waveform generator supported by R&S®WinIQSIM2™ and R&S®WinIQSIM™ simulation software
Color display with 800 � 600 pixels (SVGA format)
Intuitive user interface with graphical display of signal flow (block diagram)
Graphical display of baseband signal through built-in transients recorder
Context-sensitive Help system
Tooltips for all edit fields
Optional digital I/Q output; support of R&S®EX-IQ-Box for flexible data formats and clock generation
Support of R&S®NRP power sensors
Remote control via LAN (Gigabit Ethernet, VXI11) and GPIB
Remote operation via Windows Remote Desktop or VNC
User-selectable trigger and marker signals
USB connectors for keyboard, mouse, and memory stick
LXI class C compliance

Standard accessories

Recommended options

SMJ-B103 100 kHz to 3 GHz
SMJ-B106 100 kHz to 6 GHz

More products Rohde & Schwarz

MICROWAVE SIGNAL GENERATOR 10 MHZ..20 GHZ/ 27 GHZ/ 30 GHZ/ 40 GHZ ROHDE & SCHWARZ SMR

• 1 GHz to 20 GHz, 27 GHz, 30 GHz or 40 GHz Frequency ranges
• 10 MHz to 1 GHz Optional Frequency Extension
• 1 kHz Frequency resolution(0.1 Hz optional)

DIGITAL OSCILLOSCOPE 4 X 500 MHZ ROHDE & SCHWARZ RTM1054

• 500 MHz bandwidth
• 4 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box

DIGITAL OSCILLOSCOPE 2 X 2 GHZ ROHDE & SCHWARZ RTO1022

• 2 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

PORTABLE SPECTRUM ANALYZER 9 KHZ..3.6 GHZ ROHDE & SCHWARZ FSH4

• 9 kHz to 3.6 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

R&S HAMEG HMC8015 POWER ANALYZER

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions

HANDHELD CABLE & ANTENNA ANALYZER 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 3.2 GHZ ROHDE & SCHWARZ SMC100A

• 9 kHz to 1.1 GHz or 3.2 GHz Frequency range
• >+17 dBm Maximum output level typ.
• AM/FM/fM/pulse modulation provided as standard

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals