20 Hz to 3.6 / 7 / 13.6 / 30 / 40 GHz Frequency range
40 MHz analysis bandwidth
0.4 dB level measurement uncertainty up to 7 GHz
Measurement applications for GSM/EDGE (including EDGE evo), WCDMA/HSPA+, LTE, WiMAX™, WLAN, CDMA2000®, 1xEV-DO
Easy on-site upgrading with options
-110 dBc (1 Hz) phase noise at 10 kHz frequency offset
+15 dBm third order intercept (TOI)
Displayed average noise level (DANL) in 1 Hz bandwidth: -155 dBm at 1 GHz, -147 dBm at 30 GHz with preamplifier R&S FSV-B24: -162 dBm at 30 GHz
Removable hard drive for applications where security is a concern
Frequency range up to 110 GHz with R&S FSV-B21 option integrated in the R&S FSV30/40 and the R&S FS-Z60/-Z75/-Z90/-Z110 harmonics mixers
Measurement applications for vector signal analysis
LXI Class C conformant

Recommended options

R&S FSV3 9 kHz to 3.6 GHz
R&S FSV7 9 kHz to 7 GHz
R&S FSV13 9 kHz to 13.6 GHz
R&S FSV30 9 kHz to 30 GHz
R&S FSV40 9 kHz to 40 GHz
R&S FSV with R&S FSV-B29 option 20 Hz to 3.6/7/13.6/30 GHz

More products Rohde & Schwarz

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

R&S ZNL VECTOR NETWORK ANALYZER

• Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
• Two-port vector network analyzer for bidirectional measurements
• Wide dynamic range of typ. 130 dB

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

R&S NRP2 POWER METER

• Optionally integrated 50 MHz/1 mW reference source
• Hardware interfaces for remote control and triggering
• Emulation of other legacy power meter
• User-programmable save/recall locations

PORTABLE SPECTRUM ANALYZER 100 KHZ..3 GHZ ROHDE & SCHWARZ FSH3

• 100 kHz to 3 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

DIGITAL OSCILLOSCOPE 4 X 2GHZ ROHDE & SCHWARZ RTO1024

• 2 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

R&S HAMEG HMC8012 DIGITAL MULTIMETER

• Basic accuracy: 0.015 % (DC)
• 5�-digit display (480 000 counts)
• Simultaneous display of three measurement functions, e.g. DC + AC + statistics
• Measurement rate: up to 200 values/s

VECTOR NETWORK ANALYZER 300 KHZ..4/ 8/ 14/ 20 GHZ ROHDE & SCHWARZ ZVB

• 300 kHz to 4 GHz/ 8 GHz or
• 10 MHz to 14 GHz/ 20 GHz
• Instruments with two or four test ports - for multiport and balanced measurements

PORTABLE SPECTRUM ANALYZER 9 KHZ..3.6 GHZ ROHDE & SCHWARZ FSH4

• 9 kHz to 3.6 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

R&S HMC804X POWER SUPPLY

• High energy efficiency, low heat dissipation and quiet fans
• Low residual ripple due to linear postregulation
• Convenient parallel and serial operation via V/I tracking