9 kHz to 3.6 GHz Frequency range
100 Hz to 3 MHz RBW
<-141dBm sensitivity, with preamp <-161 dBm
Low measurement uncertainty (< 1 dB)
TDMA power, channel power, field stringth, OBW, channel table
Easy to replace Li-Ion battery, up to 4.5 hr operation
Internal VSWR bridge (FSH424/828)
Two-port network analyzer (opt. FSH-K42)
20 MHz demodulation bandwidth for analyzing LTE signals
Directional power measurements up to 4 GHz under operating conditions
SD memory expansion slot to store measurements, results and installation settings
Larger 6.5" Color LCD display
USB and LAN interfaces
Rugged, splash-proof housing for rough work in the field

Recommended options

Rohde & Schwarz FSH404 Spectrum Analyzer 9 kHz to 3.6 GHz. With Preamplifier
Rohde & Schwarz FSH414 Spectrum Analyzer 9 kHz to 3.6 GHz. With Preamplifier, Tracking Generator
Rohde & Schwarz FSH424 Spectrum Analyzer 100 kHz to 3.6 GHz. With Preamplifier, Tracking Generator, Internal VSWR Bridge

FSH-K40 Enables full LAN/USB Remote Control

FSH-K41 Distance to Fault Measurements Only for models FSH424 and FSH828. FSH-Z320 or FSH-Z321 is also required.

FSH-K42 Vector Transmission/Reflection Measurements

More products Rohde & Schwarz

RF USB POWER METER USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z21

• 10 MHz to 18 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

VECTOR SIGNAL GENERATOR 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

ANALOG/DIGITAL AUDIO ANLAYZER ROHDE & SCHWARZ UPV

• Suitable for all interfaces: analog, digital and combined
• Sampling rate up to 400 kHz
• Compact instrument with integrated PC
• generate a wide variety of analog and digital test signals
• Efficient as well as multichannel FFT analysis with a resolution down to the mHz
• Everything included; no peripherals required

RF USB POWER METER USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z23

• 10 MHz to 18 GHz
• -47 dBm to +42 dBm (20 nW to 15 W)
• 89 dB dynamic range for CW and modulated signals

RF SIGNAL GENERATOR 9 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMA100A

• 9 kHz to 3 GHz or 6 GHz Frequency range
• Frequency, level and LF sweeps
• Very low SSB phase noise of typ. -134 dBc
• Phase-continuous frequency setting

PORTABLE SPECTRUM ANALYZER 9 KHZ..8 GHZ ROHDE & SCHWARZ FSH8

• 9 kHz to 8 GHz Frequency range
• 100 Hz to 3 MHz RBW
• <-141dBm sensitivity, with preamp <-161 dBm

R&S HMC804X POWER SUPPLY

• High energy efficiency, low heat dissipation and quiet fans
• Low residual ripple due to linear postregulation
• Convenient parallel and serial operation via V/I tracking

DIGITAL OSCILLOSCOPE 2 X 1 GHZ ROHDE & SCHWARZ RTO1012

• 1 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

TV SIGNAL, BROADCASTING, SOUND SPECTRUM ANALYZER 500 KHZ..3 GHZ ROHDE & SCHWARZ ETL

• Frequency range from 500 kHz to 3 GHz
• TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis
• FPGA and chip-based realtime demodulators for analog TV, DVB-T, DVB-T2, DVB-H, ATSC/8VSB, ATSC Mobile DTV, ISDB-T(B), J.83/A/C, DVB-C, J.83/B, DTMB, T-DMB/DAB and FM (radio)
• Baseband outputs
• Video and Audio signal generator
• MPEG-2 transport stream generator/recorder

SPECTRUM ANALYZER 9 KHZ..3 GHZ / 6 GHZ / 18 GHZ ROHDE & SCHWARZ FSL

• 9 kHz to 3 GHz / 6 GHz / 18 GHz Frequency range
• Resolution bandwidth 300 Hz to 10 MHz, opt. to 10 Hz
• 20 MHz I/Q demodulation bandwidth (28 MHz for FSL18)
• Best RF characteristics in its class
• Optional tracking generator