9 kHz to 8 GHz Frequency range
100 Hz to 3 MHz RBW
<-141dBm sensitivity, with preamp <-161 dBm
Low measurement uncertainty (< 1 dB)
TDMA power, channel power, field stringth, OBW, channel table
Easy to replace Li-Ion battery, up to 4.5 hr operation
Internal VSWR bridge (FSH424/828)
Two-port network analyzer (opt. FSH-K42)
20 MHz demodulation bandwidth for analyzing LTE signals
Directional power measurements up to 4 GHz under operating conditions
SD memory expansion slot to store measurements, results and installation settings
Larger 6.5" Color LCD display
USB and LAN interfaces
Rugged, splash-proof housing for rough work in the field

Recommended options

Rohde & Schwarz FSH808 Spectrum Analyzer 9 kHz to 8 GHz. With Preamplifier
Rohde & Schwarz FSH818 Spectrum Analyzer 9 kHz to 8 GHz. With Preamplifier, Tracking Generator
Rohde & Schwarz FSH828 Spectrum Analyzer 100 kHz to 8 GHz. With Preamplifier, Tracking Generator, Internal VSWR Bridge

FSH-K40 Enables full LAN/USB Remote Control

FSH-K41 Distance to Fault Measurements Only for models FSH424 and FSH828. FSH-Z320 or FSH-Z321 is also required.

FSH-K42 Vector Transmission/Reflection Measurements

More products Rohde & Schwarz

DIGITAL OSCILLOSCOPE 4 X 2GHZ ROHDE & SCHWARZ RTO1024

• 2 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

R&S RTO2000 OSCILLOSCOPE

• Quickly find signal faults with 1 million waveforms/s
• 2 Gsample deep memory to analyze long sequences
• Up to 16-bit vertical resolution
• Multi-channel spectrum analysis

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box

VECTOR SIGNAL GENERATOR 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

RF SIGNAL GENERATOR 9 KHZ..3 GHZ/ 6 GHZ ROHDE & SCHWARZ SMA100A

• 9 kHz to 3 GHz or 6 GHz Frequency range
• Frequency, level and LF sweeps
• Very low SSB phase noise of typ. -134 dBc
• Phase-continuous frequency setting

SPECTRUM ANALYZER 9 KHZ..3 GHZ ROHDE & SCHWARZ FS300

• 9 kHz to 3 GHz Frequency range
• 200 Hz to 1 MHz RBW
• 1 Hz Frequency counter resolution
• +33 dBm Maximum input level

HANDHELD CABLE & ANTENNA ANALYZER 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

RF POWER METER ROHDE & SCHWARZ NRP2

• Power measurements with a base unit or with cost-efficient USB power sensors alone
• Average, peak and peak-to-average power measurements from DC to 67 GHz
• Accurate measurements for GSM/EDGE, 3G, WLAN, WiMAX™, LTE and beyond
• Solutions for radar and EMC applications
• Ultra-fast statistical analysis

SPECTRUM ANALYZER 9 KHZ..3 GHZ / 6 GHZ ROHDE & SCHWARZ FSC

• 9 kHz to 3 GHz or 6 GHz Frequency range
• 10 Hz to 3 MHz RBW
• High sensitivity

RF USB POWER METER USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals