300 kHz to 4 GHz/ 8 GHz or
10 MHz to 14 GHz/ 20 GHz
Instruments with two or four test ports - for multiport and balanced measurements
Two internal sources (four-port models) - to provide RF and LO signals for mixer measurements by means of a single unit
Capability to perform balanced measurements - to characterize balanced DUTs by their mixed mode S-parameters
Optional automatic calibration units - to speed up calibration and avoid operator errors
60001 points per trace
Dynamic range better than 123 dB (typ. 130 dB)
Power sweep range >50 dB
Measurement time < 4.5 ms for 201 test points (frequency sweep)
Switching time between channels < 1 ms
Switching time between instrument setups < 10 ms
Data transfer time < 0.7 ms (201 test points via RSIB)
Simultaneous measurement of more than one DUT
Intuitive Windows-based operation via mouse
Operation by means of hardkeys and softkeys
Large number of channels, traces and setups that can be loaded simultaneously
LXI Class C conformant

Recommended options

R&S ZVB4 Vector Network Analyzer 2 ports, 300 kHz to 4 GHz Test ports: N (f)
R&S ZVB4 Vector Network Analyzer 4 ports, 300 kHz to 4 GHz Test ports: N (f)
R&S ZVB8 Vector Network Analyzer 2 ports, 300 kHz to 8 GHz Test ports: N (f)
R&S ZVB8 Vector Network Analyzer 4 ports, 300 kHz to 8 GHz Test ports: N (f)
R&S ZVB14 Vector Network Analyzer 2 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m), compact version
R&S ZVB14 Vector Network Analyzer 2 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m), high-box version
R&S ZVB14 Vector Network Analyzer 4 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m)
R&S ZVB20 Vector Network Analyzer 2 ports, compact version 10 MHz to 20 GHz Test ports: 3.5 mm (m)

More products Rohde & Schwarz

RF SIGNAL GENERATOR 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

R&S HAMEG HMC8015 POWER ANALYZER

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions

DIGITAL OSCILLOSCOPE 2 X 2 GHZ ROHDE & SCHWARZ RTO1022

• 2 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

R&S ZND VECTOR NETWORK ANALYZERS

• Two-port network analyzer for unidirectional measurements from 100 kHz to 4.5 GHz
• Frequency range can be extended to 8.5 GHz
• Test set can be enhanced for bidirectional measurements

R&S ZNL VECTOR NETWORK ANALYZER

• Frequency range from 5 kHz to 3 GHz (R&S®ZNL3) or 5 kHz to 6 GHz (R&S®ZNL6)
• Two-port vector network analyzer for bidirectional measurements
• Wide dynamic range of typ. 130 dB

PORTABLE SPECTRUM ANALYZER 10 MHZ..18 GHZ ROHDE & SCHWARZ FSH18

• 10 MHz to 18 GHz Frequency range
• 100 Hz to 1 MHz RBW
• 10 Hz to 1MHz VBW

TV SPECTRUM ANALYZER 100 KHZ..3 GHZ ROHDE & SCHWARZ FSH3-TV

• Measurement functions for analog and digital TV signals
• Full-fledged spectrum analyzer
• Combined video/ASI output
• Compact and robust housing

DIGITAL OSCILLOSCOPE 2 X 500 MHZ ROHDE & SCHWARZ RTM1052

• 500 MHz bandwidth
• 2 analog channels
• 2.5 GSa/s sample rate, 5 GS/s interleaved

VECTOR NETWORK ANALYZER 300 KHZ..4/ 8/ 14/ 20 GHZ ROHDE & SCHWARZ ZVB

• 300 kHz to 4 GHz/ 8 GHz or
• 10 MHz to 14 GHz/ 20 GHz
• Instruments with two or four test ports - for multiport and balanced measurements

HANDHELD CABLE & ANTENNA ANALYZER 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement